[WriteLog] Frustration with Writelog and my Flexradio 8400M

[Rich Newbould]

I know nothing about Flex and your best bet is if somebody with one has 
done what you are attempting.

If the Flex creates a separate comport for each slice.

I would think you can set WL for 2 Radios

Then in ports assign the appropriate comport and speed to each "radio" 
(slice)


On 4/4/2026 8:29 AM, Mark Griffin wrote:
> I tried this morning to in the SO2R Menu Item in the Ports Section to add
> my Slice B. For some reason it will allow me to use the Flexadio Option for
> Slice A, but not for Slice B. And I somewhat surmise that there are not
> that many people who use a Flexradio 8000 series with Writelog. Or, has
> really gotten it to work without any problems.
>
> Nobody has given me any advice on how to set up the ports so that I get the
> frequencies that are on my radio screen Because the frequencies that are on
> the computer screen for Slice B is not communicating properly with the
> Writelog Program. I realize that Slice B is nothing more than a Second VFO
> but I shouldn't have to set both my slices to emulate a Kenwood TS-2000
> with the proper Com Ports to get it to work. I have shared these
> frustrations with Writelog Customer Support and hopefully they can either
> set me straight on this. Or, choosing to operate with Writelog was perhaps
> not a good idea.
> Mark Griffin, KB3Z
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/