FT-1000MP 455 kHz 500 Hz CW filter full scale glitch

[Scotty Neustadter]

At 10:58 PM 8/1/96 -0400, you wrote:
>At 05:57 PM 8/1/96 -0400, you wrote:
>>
>>Ok. I tried switching from 2.4 to 500hz filter position several times in
>>cw mode. There is no delay at all. The Main s meter does blink but it is
>>so fast that I can't tell what is happening. I would consider this normal. 
>>Also I tried the lsb/usb position and with dual rx turned on. Nothing
>>abnormal was noticed. 
>
>Pretty much the same here, though I have just a split-second pause when
>switching to 500 hz filter..nothing I would ever notice if it hadn't been
>pointed out.  Other filters virtually unnoticable..in milliseconds.  I
>wouldn't even call it a glitch.
>
>73,  Steve  KR4DL
>
>
Check here also, same results as above. I have one of the first (If not the
first) FT1000MP sold here in US.  The only thing I do not have is the 500HZ
in the subreceiver.

73
Scotty Neustadter, N4PYD                  Internet: scotty@iquest.com   
Huntsville Hamfest Chairman		  Home Fax 205 880 9530 (4 ring pickup)
Question Pool Committee, NCVEC
             "Hold the screwdriver by the fat yellow end"