[Yaesu] FT767

[Dale R. Parfitt]

After owning an FT767 for a year (bought it used) I finally called Yaesu 
to inquire about a very noticeable clicking sound heard when tuning a CW 
signal. Each time the counter changes in its 100HZ position an annoying 
click or chirp is heard from the speaker (I surmised the PLL momentarily 
unlocked) when the 1 KHz position changes the click is even louder. I 
described the condx over the phone and had the tech listen as I tuned 
across the 25KHz marker sig. Nobody had ever heard of such a problem. I 
finally sent the rig to them and after 2 weeks on the bench I am told 
this is normal for this rig. Later model had an updated PLL that still 
clicked but less noticeable. Can this be? The rig is next to useless for 
weak signal work on CW and annoying on any CW signal.
Anyone else heard of this?

Dale
W4OP

--
FAQ on WWW:               http://www.primenet.com/~ke7gh/yaesu.html
Submissions:              yaesu@contesting.com
Administrative requests:  yaesu-REQUEST@contesting.com
Problems:                 owner-yaesu@contesting.com
Sponsored by:             Akorn Access, Inc. & N4VJ / K4AAA