Same over here...
I hear that is the way it is... Use the tuned front end for the above 20 bands... and flat for lower than 20.... But I sense that it would be a pain in the butt to be changing it all the time especially if you jump from 20 to 40 chasing DX...
I just keep it on tuned... the front end is a little hotter on 20... and if I can hear the station on 40... it doesnt affect my TX.
Tom
K9KJ
(Whoa.. I think I just confused myself)
>>> "Jack Trampler - N2JT" <n2jt@fast.net> 11/4/97 10:12:46 AM >>>
I would like to know if the front end amplifier in my FT-1000MP is working
correctly. On 10/12 meters received signals are much stronger with the
"Tuned" setting as opposed to "Flat", however, on 160 - 40 meters, signals
are actually attenuated in the "Tuned" mode. The difference is about 4 - 5
S-units. Shouldn't the signals be stronger in "Tuned" mode?
73,
Jack - N2JT
packet: N2JT@W3BI.#EPA.PA.USA.NA
e-mail: n2jt@fast.net
--
FAQ on WWW: http://www.qsl.net/k7on/yaesu.html
Submissions: yaesu@contesting.com
Administrative requests: yaesu-REQUEST@contesting.com
Problems: owner-yaesu@contesting.com
Search: http://www.contesting.com/km9p/search.htm
--
FAQ on WWW: http://www.qsl.net/k7on/yaesu.html
Submissions: yaesu@contesting.com
Administrative requests: yaesu-REQUEST@contesting.com
Problems: owner-yaesu@contesting.com
Search: http://www.contesting.com/km9p/search.htm