[Yaesu] 757GX 3 and 8 pin connectors?

[Timothy J. Strong]

Hi all!

I am new to the list and I have just finished searching the archives for
an answer to my question.  I am looking for a source for the 3 pin CAT
connector and the 8 pin connector used for controlling a FC-757AT
antenna tuner.  I plan to build a CAT interface for the 757GX and
possibly play around with writing my own control software.  I have
recently purchased a used FC-757AT antenna tuner and I would like to
have the rig automatically control the tuner.  However, the tuner did
not come with the connector for the 757GX, it did come with the 9 pin
power (2 pins actually used) connector.

Therefore, I need a source for these connectors along with the part
number from the source.

Thanks a lot and 73,

-- 

-Tim
kak@dos.nortel.com

----------------------------------------------------------
                           KB2YQD
  -------  ___o       Timothy J Strong       o___
 -------  `\-<,       Northern Telecom       ,>-/'
------- (*)/'(*)     97 Humboldt Street     (*)`\(*)
       ----------   Rochester, NY  14629   --o---o-o-
-------- Summer -------- QRP-L #780 -------- Winter ------

--
FAQ on WWW:               http://www.qsl.net/k7on/yaesu.html
Submissions:              yaesu@contesting.com
Administrative requests:  yaesu-REQUEST@contesting.com
Problems:                 owner-yaesu@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm