[Yaesu] Interface problem

[Larry Menzel]

Hello,

I have been running my FT1000D for about two years now with DX4WIN with 
no trouble.  

However, I changed motherboards in my computer recently, and now I can't 
get the radio to "talk" to the computer.  I've tested the com port and it's
responding
correctly.  Also checked: Windows to make sure the com settings were correct,
DX4WIN Preferences and everything is set correctly.  I set the ports on the
board
in CMOS...nothing works.  I reset the CPU in the radio, too.  I'm using a
W1GEE
interface and it tests OK.

The error message I get from DX4WIN is error #3, that the radio did not
return the
data the computer expected.  I did the test in DX4WIN and the test
responded  with
a "timeout" message.

Any ideas???  If you do, please respond to me privately as I'm not
currently a list
subscriber, and I don't want to take up list space, either.

Thanks in advance to any who might have experience the same problem


--
FAQ on WWW:               http://www.qsl.net/k7on/yaesu.html
Submissions:              yaesu@contesting.com
Administrative requests:  yaesu-REQUEST@contesting.com
Problems:                 owner-yaesu@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm