From Tyler Stewart" Message-ID: <00c401c08c04$28cc2840$8516ef18@p3> One source that usually has them in stock is The RF Connection in Gaithersburg MD. Their website is www.therfc.com . 73, Ty K3MM ----- Original Message ----- From: "Marty Tippin" To: Sent: Wednesday, January 31, 2001 3:14 AM Subject: [Yaesu] 8-Pin DIN Plug for FT-100MP? > > Anybody know where I can find an 8-pin plug for the band data output on the > back of the FT-1000MP? > > I thought maybe it was a standard DIN pin configuration, but apparently not > - I got an 8-pin DIN plug from DigiKey and it won't fit. > > Any info would be appreciated! I need two of these plugs ASAP if anyone can > help! > > Thanks & 73, > > -Marty NW0L > martyt@pobox.com > > -- > FAQ on WWW: http://www.contesting.com/FAQ/yaesu > Submissions: yaesu@contesting.com > Administrative requests: yaesu-REQUEST@contesting.com > Problems: owner-yaesu@contesting.com > > -- FAQ on WWW: http://www.contesting.com/FAQ/yaesu Submissions: yaesu@contesting.com Administrative requests: yaesu-REQUEST@contesting.com Problems: owner-yaesu@contesting.com From helmut@df7zs.de Wed Feb 7 19:51:11 2001 From: helmut@df7zs.de (Helmut (DF7ZS)) Date: Wed, 7 Feb 2001 20:51:11 +0100 Subject: [Yaesu] FT-1000MP CAT MANUAL Message-ID: This is a multi-part message in MIME format. ------=_NextPart_000_0008_01C09147.B419A920 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Hi There. Where can I find a full reference of all commands the FT-1000MP understands through his PC (CAT) interface ? There must be more stuff than you'll find in the manual. Examples: How to adjust output power via CAT ? How to access the TUNE from FH-1 via CAT ? Hackers guide needed. 73sss Helmut www.df7zs.de ------=_NextPart_000_0008_01C09147.B419A920 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Hi=20 There.
 
Where = can I find a=20 full reference of all commands
the = FT-1000MP=20 understands through his PC (CAT)
interface=20 ?
 
There = must be more=20 stuff than you'll find in the manual.
 
Examples:
 
How to = adjust output=20 power via CAT ?
How to = access the=20 TUNE from FH-1 via CAT ?
 
Hackers guide=20 needed.
 
73sss
 
Helmut
 
www.df7zs.de
 
 
------=_NextPart_000_0008_01C09147.B419A920-- -- FAQ on WWW: http://www.contesting.com/FAQ/yaesu Submissions: yaesu@contesting.com Administrative requests: yaesu-REQUEST@contesting.com Problems: owner-yaesu@contesting.com From ContstEmailAlias@aol.com Thu Feb 8 03:15:35 2001 From: ContstEmailAlias@aol.com (ContstEmailAlias@aol.com) Date: Wed, 7 Feb 2001 22:15:35 EST Subject: [Yaesu] FT-1000MP CAT MANUAL Message-ID: <36.11c135fd.27b36957@aol.com> Hi Helmut, I worked with Chip at Yaesu when we were adding support for the 1000MP to Log Windows. What is in the manual is the full reference. There is a doc error though, on Opcode 5 (VFO A./B) the param must always be a '1' to toggle the VFO from A to B. (You can't tell it which VFO to go to, just to toggle the VFO). I told Chip about this, and he's updating it in the newer user manuals. But what is in the 1000MP manual is ALL the CAT commands the 1000MP supports. Many functions that the MP has are not supported in the CAT interface. Rick - W4PC http://www.logwindows.com http://www.cssincorp.com In a message dated 2/7/2001 14:52:14 PM Central Standard Time, helmut@df7zs.de writes: << Hi There. Where can I find a full reference of all commands the FT-1000MP understands through his PC (CAT) interface ? There must be more stuff than you'll find in the manual. Examples: How to adjust output power via CAT ? How to access the TUNE from FH-1 via CAT ? Hackers guide needed. 73sss Helmut www.df7zs.de >> -- FAQ on WWW: http://www.contesting.com/FAQ/yaesu Submissions: yaesu@contesting.com Administrative requests: yaesu-REQUEST@contesting.com Problems: owner-yaesu@contesting.com From Klaus.Werner@gbr.xerox.com Thu Feb 8 14:55:04 2001 From: Klaus.Werner@gbr.xerox.com (Werner, Klaus) Date: Thu, 8 Feb 2001 14:55:04 -0000 Subject: [Yaesu] FRG-100 DC Powercord Message-ID: <35173BEDCF78D311A8C000805FBB9F16019C1BDD@gbruxbms04.uxb.gbr.xerox.com> > I was trying to make up a second power lead for the FRG100, for mobile > ops, > and found that the miniature power plug (+length of cable) appears to be > available through Yaesu UK only. Their quote: £4.61 + £2.00 p&p !! Must be > a > phantastic margin ..... > Has anyone got round this, maybe located a source for the plug ?? A > homemade > lead shouldn't cost more than 50p .... > Hints appreciated (I need a lead terminated with a cigar lighter plug). > 73s, Klaus G7RTI -- FAQ on WWW: http://www.contesting.com/FAQ/yaesu Submissions: yaesu@contesting.com Administrative requests: yaesu-REQUEST@contesting.com Problems: owner-yaesu@contesting.com From Gi0vgl@aol.com Fri Feb 9 19:36:41 2001 From: Gi0vgl@aol.com (Gi0vgl@aol.com) Date: Fri, 9 Feb 2001 14:36:41 EST Subject: [Yaesu] ft1000d.. help.. Message-ID: <24.10ec05d8.27b5a0c9@aol.com> Hi all I was wondering if some of you folks out there could help me I have an ft1000d the serial no is 0g060027.. the first problem I noticed was the s meter had stopped registering incoming signals everything else swr, po, ect works fine.. then perhaps a few days later she seemed to be down on recieve and the problem gets worse the longer the radio is running.. now there seems to be a vast difference in recieve on the yaesu compared to my other rig [ts930s] can anyone throw some light on the problem or problems? are the symptons connected..? or two different faults entirely. yours george ...gi0vgl.. -- FAQ on WWW: http://www.contesting.com/FAQ/yaesu Submissions: yaesu@contesting.com Administrative requests: yaesu-REQUEST@contesting.com Problems: owner-yaesu@contesting.com From ken-k5id@juno.com Mon Feb 12 03:01:29 2001 From: ken-k5id@juno.com (Kenton E Graham) Date: Sun, 11 Feb 2001 21:01:29 -0600 Subject: [Yaesu] Items wanted: ft707 cw filter; Op manual Message-ID: <20010211.210129.-150531.3.ken-k5id@juno.com> Hello, Having just gotten a nice Ft 707 at Memphis, I am looking for a cw filter (500 or 600 hz) and an operating manual... What have you? Regards, Ken K5ID -- FAQ on WWW: http://www.contesting.com/FAQ/yaesu Submissions: yaesu@contesting.com Administrative requests: yaesu-REQUEST@contesting.com Problems: owner-yaesu@contesting.com From aa8u@modempool.com Fri Feb 16 19:20:06 2001 From: aa8u@modempool.com (Bruce Lallathin) Date: Fri, 16 Feb 2001 14:20:06 -0500 Subject: [Yaesu] How much to ask Message-ID: <4.2.0.58.20010216141807.00941d00@imail.modempool.com> I am going to sell my FT-1000D and don't know how much I should expect to get for it. It is in mint condition with all the filters, mic, books, and packing materials. Any Idea? Would $2500 be too much to ask? -- FAQ on WWW: http://www.contesting.com/FAQ/yaesu Submissions: yaesu@contesting.com Administrative requests: yaesu-REQUEST@contesting.com Problems: owner-yaesu@contesting.com From ken-k5id@juno.com Sun Feb 18 12:25:42 2001 From: ken-k5id@juno.com (Kenton E Graham) Date: Sun, 18 Feb 2001 06:25:42 -0600 Subject: [Yaesu] Need CW Filter Message-ID: <20010218.062543.-248329.1.ken-k5id@juno.com> Hello, I need a cw filter FL8.9HC, FL8.9HCN, or the equivalent Inrad filter. These fit FT707, FT107, FT101ZD, FT901/902. Price and Condition please. Regards, Ken K5ID ken-k5id@juno.com -- FAQ on WWW: http://www.contesting.com/FAQ/yaesu Submissions: yaesu@contesting.com Administrative requests: yaesu-REQUEST@contesting.com Problems: owner-yaesu@contesting.com From va3rj@idirect.com Tue Feb 20 12:31:05 2001 From: va3rj@idirect.com (Dave Raycroft, VA3RJ) Date: Tue, 20 Feb 2001 07:31:05 -0500 Subject: [Yaesu] FT-890 Service Manual Message-ID: <001701c09b39$11908920$4a0e9ad8@david> Does anyone know if there is an on-line service manual for the Yaesu FT-890? I am also looking for a source for the following - ATU-2 internal tuner, new, or used (in mint condition and 100% working). XF-455K-251-01 (250 Hz) CW filter. Thanks in advance. 73, Dave VA3RJ Web: http://www.qsl.net/va3rj/ Mirror: http://webhome.idirect.com/~va3rj/ Email: va3rj@rac.ca FISTS #6196 -- FAQ on WWW: http://www.contesting.com/FAQ/yaesu Submissions: yaesu@contesting.com Administrative requests: yaesu-REQUEST@contesting.com Problems: owner-yaesu@contesting.com From nf4l@pobox.com Wed Feb 21 02:17:52 2001 From: nf4l@pobox.com (Mikey) Date: Tue, 20 Feb 2001 21:17:52 -0500 Subject: [Yaesu] FT990 power Message-ID: <004b01c09bac$8020fe60$db04c7d8@broomhilda> On all bands above 30m the output is about 60-75 watts. I don't have a service manual. I know there is a way to adjust the power up. Anybody have the how-to? Or any hints on what the problem might be? The previous owner had the power up to about 125 watts, and when I sent the rig to Yaesu for a ROM upgrade and TXCO, they recommended setting it back to 100 watts, which they did, roughly a year ago. TIA Mike, NF4L -- FAQ on WWW: http://www.contesting.com/FAQ/yaesu Submissions: yaesu@contesting.com Administrative requests: yaesu-REQUEST@contesting.com Problems: owner-yaesu@contesting.com From Gi0vgl@aol.com Wed Feb 21 12:41:19 2001 From: Gi0vgl@aol.com (Gi0vgl@aol.com) Date: Wed, 21 Feb 2001 07:41:19 EST Subject: [Yaesu] (no subject) Message-ID: <85.72a0f0f.27c5116f@aol.com> Hi all My ft1000d has to go to a repair shop for a fault repair and I was wondering while it is there was there any worthwhile mods worth doing.. I have read some where about pin diodes in the front end that can be replaced or up graded ...what would be the benefits of this... or other mods? the radio is a fairly old one the serial no is 0g060027 can anyone tell me the approx year of manufacture? yours george warnock ....gi0vgl... -- FAQ on WWW: http://www.contesting.com/FAQ/yaesu Submissions: yaesu@contesting.com Administrative requests: yaesu-REQUEST@contesting.com Problems: owner-yaesu@contesting.com