[Yaesu] LOCO FT1000
Lic. Andres Kim XE1KIM
akim@ptq.pemex.com
Wed, 10 Jan 2001 05:17:57 -0600
This is a multi-part message in MIME format.
------=_NextPart_000_003D_01C07AC4.B16F1640
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Hi Guys hopefully someone can help me..
My FT1000 (Serial 0G0) does not stop
blinking BLINK BLINK BLINK all the time
of course no TX or RX, if I disconnect the
unlock signal from the control unit of course
the problem goes away but still no RX on the main IF
no tX also, but I do hear on the RX2 unit, but thats
when I disconnect the unlock wire from control unit.
I thought it was the local unit so I bought it from
YAESU in Cal., YEP problem did not went away,
Since I cannot send my radio to yaesu in the USA
Because I bought it on a flea market so no import
papers, and there is no one who can help me
here I=B4m trying to replace unit=B4s, again I have just replace
local Unit, Do you know what unit do I have to replace
(no compromise) I need my ft1000 running, Im almost=20
sure that IF and RF unit=B4s are not the problem, maybe
control unit, but again maybe control unit is receiving the "order"
to block IF and TX, I hope I explained myself and if you
know what unit to replace=20
If I turn on the radio with unlock signal disconnected no RX or TX on =
main
If, if I press DUAL I do hear RX2 little bit like i cannot find the =
signals
correctly, but i do hear, if I re-connect unlock signal from control =
unit
the problem starts BLINK BLINK BLINK BLIK also the display, and of =
course
no TX or RX.
Best=20
Andy Kim
XE1KIM
------=_NextPart_000_003D_01C07AC4.B16F1640
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content=3D"text/html; charset=3Diso-8859-1" =
http-equiv=3DContent-Type>
<META content=3D"MSHTML 5.00.2919.6307" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>
<DIV><FONT face=3DArial size=3D2>Hi Guys hopefully someone can help=20
me..</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>My FT1000 (Serial 0G0) does not =
stop</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>blinking BLINK BLINK BLINK all the=20
time</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>of course no TX or RX, if I disconnect=20
the</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>unlock signal from the control unit of=20
course</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>the problem goes away but still no RX =
on the main=20
IF</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>no tX also, but I do hear on the RX2 =
unit, but=20
thats</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>when I disconnect the unlock wire from =
control=20
unit.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I thought it was the local unit so =
I bought it=20
from</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>YAESU in Cal., YEP problem did not went =
away,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Since I cannot send my radio to yaesu =
in the=20
USA</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Because I bought it on a flea market so =
no=20
import</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>papers, and there is no one who can =
help=20
me</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>here I=B4m trying to replace unit=B4s, =
again I have=20
just replace</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>local Unit, Do you know what unit do I =
have to=20
replace</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>(no compromise) I need my ft1000 =
running, Im=20
almost </FONT></DIV>
<DIV><FONT face=3DArial size=3D2>sure that IF and RF unit=B4s are not =
the problem,=20
maybe</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>control unit, but again maybe control =
unit is=20
receiving the "order"</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>to block IF and TX, I hope I explained =
myself and=20
if you</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>know what unit to replace </FONT></DIV>
<DIV><FONT face=3DArial size=3D2>If I turn on the radio with unlock =
signal=20
disconnected no RX or TX on main</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>If, if I press DUAL I do hear RX2 =
little bit like i=20
cannot find the signals</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>correctly, but i do hear, if I =
re-connect unlock=20
signal from control unit</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>the problem starts BLINK BLINK BLINK =
BLIK also the=20
display, and of course</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>no TX or RX.</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>Best </FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Andy Kim</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>XE1KIM</FONT></DIV>
<DIV> </DIV></FONT></DIV></BODY></HTML>
------=_NextPart_000_003D_01C07AC4.B16F1640--
--
FAQ on WWW: http://www.contesting.com/FAQ/yaesu
Submissions: yaesu@contesting.com
Administrative requests: yaesu-REQUEST@contesting.com
Problems: owner-yaesu@contesting.com