[Yaesu] FT-840 Power Cord Connector Wiring

[Peter Hodgson]

Hi Mary - Frances

my 840 is connected as follows: looking at the rear of the connector on the cable

 CLIP
    -    +
O O O    centre pin is squared
     -  +
O O O outer pins are squared

hope that helps

73
Peter
VA3PKH

ki0dz@space.com wrote:

> Hello,
>    Does anyone know how to wire this?  I'd like to make a backup cord much shorter than the factory supplied one.  Looks like it uses four conductors, but neither the manual nor the schematics discuss the wiring of the power connector.  I have a FT-757 that has a strange wiring for the power connector and that is detailed in the manual, but not for the 840.
>    Any help would be appreciated.  Thanks.
>                                                                                                    73, Mary-Frances
> ---------------------------------------------------------------------------------------------------------
> Mary-Frances Bartels  ***  ki0dz@qsl.net       (((#)))   ^     ^
> http://www.qsl.net/ki0dz   Denver, CO             |       ^ - ^
> Order Watkins Products www.watkinsonline.com   -------    (o o)
> Beyond Infinity - WWW Services    ^#092389^    |ooOoo|  >{  |  }<
> http://members.nbci.com/beyondin               -------         RRR)*
>
> ___________________________________________________________________
> Join the Space Program: Get FREE E-mail at http://www.space.com.
>
> --
> FAQ on WWW:               http://www.contesting.com/FAQ/yaesu
> Submissions:              yaesu@contesting.com
> Administrative requests:  yaesu-REQUEST@contesting.com
> Problems:                 owner-yaesu@contesting.com


--
FAQ on WWW:               http://www.contesting.com/FAQ/yaesu
Submissions:              yaesu@contesting.com
Administrative requests:  yaesu-REQUEST@contesting.com
Problems:                 owner-yaesu@contesting.com