From wstarks@citynet.net Fri Feb 1 01:34:35 2002 From: wstarks@citynet.net (Bill Starks) Date: Thu, 31 Jan 2002 20:34:35 -0500 Subject: [Yaesu] External VFO for FT-7 Message-ID: I can't find anything in the manual and would like to know what external VFO that Yaesu sold for the FT-7. Will any others work? Bill K8WOS From gfarough@yahoo.com Fri Feb 1 02:28:41 2002 From: gfarough@yahoo.com (Glen Farough) Date: Thu, 31 Jan 2002 18:28:41 -0800 (PST) Subject: [Yaesu] Info FTV-107 or FTV-707 transverters? Message-ID: <20020201022841.25345.qmail@web20906.mail.yahoo.com> Looking for alc amp information from the chasis of the Yaesu FTV-107 or the FTV-707 transverter. Has anyone modified the FTV-901 to work with low level drive such as 30 mv from the icom 735 rather than 3 v rms from the yaesu family of tube type. I changed some resistor values in the alc amp that seemed to be just padding down the input to the dual gate mosfet. All mode audio goes through with the low level drive but no output on vhf/uhf bands. Anyone have a FTV-107 or FTV-707 chassis to compare the alc amp? Tnx de Glen VE7LGFooking __________________________________________________ Do You Yahoo!? Great stuff seeking new owners in Yahoo! Auctions! http://auctions.yahoo.com From gfarough@yahoo.com Fri Feb 1 02:25:29 2002 From: gfarough@yahoo.com (Glen Farough) Date: Thu, 31 Jan 2002 18:25:29 -0800 (PST) Subject: [Yaesu] FTV-901 transverter ALC for low level drive? Message-ID: <20020201022529.57668.qmail@web20901.mail.yahoo.com> Has anyone modified the FTV-901 to work with low level drive such as 30 mv from the icom 735 rather than 3 v rms from the yaesu family of tube type. I changed some resistor values in the alc amp that seemed to be just padding down the input to the dual gate mosfet. All mode audio goes through with the low level drive but no output on vhf/uhf bands. Anyone have a FTV-107 or FTV-707 chassis to compare the alc amp? Tnx de Glen VE7LGF __________________________________________________ Do You Yahoo!? Great stuff seeking new owners in Yahoo! Auctions! http://auctions.yahoo.com From Hopecottage42@hotmail.com Fri Feb 1 12:03:47 2002 From: Hopecottage42@hotmail.com (Wayne Francis) Date: Fri, 1 Feb 2002 07:03:47 -0500 Subject: [Yaesu] (no subject) Message-ID: This is a multi-part message in MIME format. ------=_NextPart_000_0005_01C1AAEE.987C35E0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable I have a FT-101B, great rx. The transmitter doesnt work. There isnt a = meter indication regardless of the position of the meter switch. I have = tried to adjust the ALC to no avail. The tubes are good. Any ideas ? Wayne ------=_NextPart_000_0005_01C1AAEE.987C35E0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable

I have a FT-101B, great rx. The = transmitter doesnt=20 work. There isnt a meter indication regardless of the position of the = meter=20 switch. I have tried to adjust the ALC to no avail. The tubes are good. = Any=20 ideas ?

Wayne

------=_NextPart_000_0005_01C1AAEE.987C35E0-- From ku4qd@qsl.net Sun Feb 3 13:23:59 2002 From: ku4qd@qsl.net (Caitlyn Martin) Date: 03 Feb 2002 08:23:59 -0500 Subject: [Yaesu] Looking for FP-2, box and packing for FT-7, Sigmasizer-200R Message-ID: <1012742642.8302.4.camel@localhost.localdomain> Hi, everyone, I am looking for the venerable FP-2 "dual" power supply. If anyone has one that works and is in good cosmetic condition, please e-mail me with the details. Also, I am anticipating having to move, perhaps fairly soon. I have two really clean ancient Yaesu rigs: an FT-7 and a Sigmasizer-200R. If anyone has the original box and packing for these I am actually willing to pay for it to best preserve my rigs. Again, please e-mail me. Thanks and 73, Caity KU4QD From ku4qd@qsl.net Sun Feb 3 13:27:03 2002 From: ku4qd@qsl.net (Caitlyn Martin) Date: 03 Feb 2002 08:27:03 -0500 Subject: [Yaesu] External VFO for FT-7 In-Reply-To: References: Message-ID: <1012742831.8218.8.camel@localhost.localdomain> On Thu, 2002-01-31 at 20:34, Bill Starks wrote: > > I can't find anything in the manual and would like to know what > external VFO that Yaesu sold for the FT-7. I don't think they sold one specifically for the FT-7. > Will any others work? That's what I'd like to know. Bill: did you get any responses? Anyone else care to fill us in? Thanks, Caity KU4QD From bbell@inforamp.net Sun Feb 3 23:06:57 2002 From: bbell@inforamp.net (Bob Bell) Date: Sun, 3 Feb 2002 18:06:57 -0500 Subject: [Yaesu] YS-2000 WATT METER Message-ID: Hello Alll, I am in need of a photocopy for the YS-2000 watt meter MANUAL. Will gladly pay all copying and postage expense. Tnx Bob/VE3VJX From bbell@inforamp.net Sun Feb 3 23:06:58 2002 From: bbell@inforamp.net (Bob Bell) Date: Sun, 3 Feb 2002 18:06:58 -0500 Subject: [Yaesu] YS-2000 WATT METER Message-ID: Hello Alll, I am in need of a photocopy for the YS-2000 watt meter MANUAL. Will gladly pay all copying and postage expense. Tnx Bob/VE3VJX From bbell@inforamp.net Sun Feb 3 23:06:59 2002 From: bbell@inforamp.net (Bob Bell) Date: Sun, 3 Feb 2002 18:06:59 -0500 Subject: [Yaesu] YS-2000 WATT METER Message-ID: Hello Alll, I am in need of a photocopy for the YS-2000 watt meter MANUAL. Will gladly pay all copying and postage expense. Tnx Bob/VE3VJX From george.shaw@ukf.net Mon Feb 4 17:35:14 2002 From: george.shaw@ukf.net (George Shaw) Date: Mon, 4 Feb 2002 17:35:14 -0000 Subject: [Yaesu] Yaesu YO-901 Message-ID: Has anyone got one of these for sale? Yaesu YO-901 station scope. For those who email me before about the YO301 etc I have not yet made up my mind so may be looking still for one of these if I can not find the 901. -- George Shaw eMail: george.shaw@btinternet.com eMail: george.shaw@ukf.net Home: +44 (0) 28 9062 8924 Mobile: +44 (0) 77 4036 1163 ICQ#: 1741675 --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.320 / Virus Database: 179 - Release Date: 30/01/02 From n0nb@networksplus.net Thu Feb 7 00:07:38 2002 From: n0nb@networksplus.net (Nate Bargmann) Date: Wed, 6 Feb 2002 18:07:38 -0600 Subject: [Yaesu] Intermintent FT-5100 UHF PA Message-ID: <20020207000738.GR406@localhost> Hi all. My FT-5100's UHF PA has been acting strange of late. The power output is intermintent going from full power in either high or low setting to about 250mW on the next transmission. Since it will do 30+ Watts out, I'm assuming the PA module is in good working order. So, I'm suspecting the problem may be in the control pots of VRs 1001, 1002, and 1003 as they may be dirty. I would most appreciate help from anyone who has a service manual who is willing to help me troubleshoot this thing a little closer and provide the realignment procedure for the PA. Thanks! 73, de Nate >> -- Wireless | Amateur Radio Station N0NB | "We have awakened a Internet | n0nb@networksplus.net | sleeping giant and Location | Bremen, Kansas USA EM19ov | have instilled in him Amateur radio exams; ham radio; Linux info @ | a terrible resolve". http://www.qsl.net/n0nb/ | - Admiral Yamomoto From magc@entelchile.net Thu Feb 7 13:09:28 2002 From: magc@entelchile.net (magc@entelchile.net) Date: Thu, 07 Feb 2002 09:09:28 -0400 Subject: [Yaesu] ftdx150 bias Message-ID: <0GR500C7DZ7FUQ@ismtp2.priv2.mail.entelchile.net> HI ALL I HAVE A FTDX150 SIMILAR TO FTDX100.WITH TWO 6JM6 IN THE OUTPUT , I NEED TO KNOW THE BEST BIAS CURRENT IN MA. TKS IN ADVANCE MARIANO From BYTAS@aol.com Sun Feb 10 01:44:51 2002 From: BYTAS@aol.com (BYTAS@aol.com) Date: Sat, 9 Feb 2002 20:44:51 EST Subject: [Yaesu] FT-920 Problems to report Message-ID: <16b.88f156e.29972a93@aol.com> --part1_16b.88f156e.29972a93_boundary Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit On 50 Mhz, the SWR indication shows 1.5 - 3.0 : 1 >> On investigation with a spectrum analyzer, an intermittent spur around 9 Mhz is visible. This seems to be reflected in the (accurate?) SWR indication. Also - on 10 Meters I am now hearing broadcast band signals such as 9.600 Mhz BC station come through on 28.550. HELP !! Does anyone else know of these problems? Also looking for possible RX expansion between 30-48 Mhz ?? Thanks de Al WA1T --part1_16b.88f156e.29972a93_boundary Content-Type: text/html; charset="US-ASCII" Content-Transfer-Encoding: 7bit On 50 Mhz, the SWR indication shows 1.5 - 3.0 : 1 >> On investigation with
a spectrum analyzer, an intermittent spur around 9 Mhz is visible. This seems to
be reflected in the (accurate?) SWR indication.
Also - on 10 Meters I am now hearing broadcast band signals such as 9.600 Mhz
BC station come through on 28.550.
HELP !! Does anyone else know of these problems?
Also looking for possible RX expansion between 30-48 Mhz ??
Thanks de Al WA1T --part1_16b.88f156e.29972a93_boundary-- From dquick@mn.rr.com Sun Feb 10 03:44:51 2002 From: dquick@mn.rr.com (David Quick) Date: Sat, 09 Feb 2002 21:44:51 -0600 Subject: [Yaesu] FT-920 Problems to report In-Reply-To: <16b.88f156e.29972a93@aol.com> Message-ID: <3.0.5.32.20020209214451.02763378@pop-server.mn.rr.com> Al; I have a 920 but have never experienced the symptoms you describe, so I can't help you with that. I sure would be interested in hearing about the 30 - 48 MHz receive expansion, though. At 08:44 PM 2/9/2002 EST, you wrote: >>>> On 50 Mhz, the SWR indication shows 1.5 - 3.0 : 1 >> On investigation with a spectrum analyzer, an intermittent spur around 9 Mhz is visible. This seems to be reflected in the (accurate?) SWR indication. Also - on 10 Meters I am now hearing broadcast band signals such as 9.600 Mhz BC station come through on 28.550. HELP !! Does anyone else know of these problems? Also looking for possible RX expansion between 30-48 Mhz ?? Thanks de Al WA1Tarial <<<<<<<< Dave Quick K0EKL Minneapolis, MN k0ekl@arrl.net From n5oe@inter-linc.net Mon Feb 11 21:43:47 2002 From: n5oe@inter-linc.net (Carlin Royal) Date: Mon, 11 Feb 2002 13:43:47 -0800 Subject: [Yaesu] 1000mp chirping, cant run over 70w before happens Message-ID: <3C683B12.62D3D81C@inter-linc.net> Hello all, I have a DC model 1000mp and have been having some chirping troubles reported from the station I am working. I have this radio on a 50amp supply that loafs at 25amps draw, good stable voltage under load is 13.6vdc. If I try to run more than 70 watts from the radio it starts making stange noises and sounds like a bad dx station in the middle of the night. I am sure it is not rf related because I can drive my amp with 60 watts drive creating nearly 900w output and everything sounds just fine. Has anyone got suggestions that a common person mught try to fix? The radio has had the inrad cw mod installed and that made no differance to this trouble, but did notice it sounds a lot cleaner at the 50w setting when playing back the audio recorded on the computer. Thanks N5OE From adb1x1@yahoo.com Wed Feb 13 14:35:42 2002 From: adb1x1@yahoo.com (Anthony Bowyer) Date: Wed, 13 Feb 2002 06:35:42 -0800 (PST) Subject: [Yaesu] FT-920 Message-ID: <20020213143542.21918.qmail@web13603.mail.yahoo.com> Ok guys, I have a question. I traded my FT-920 for an IC-746 and the more I use the 746, I really believe the 920 is better, in several regards. The one thing I didn't like about it was the blow-by with a narrow cw filter. Any of you used them both and can offer any suggestions? I have an opportunity to trade the 746 for a 920, and I'm teetering a bit! I just hate to have to buy more filters! But it is probably worth it! Thanks! Anthony ===== NT4X __________________________________________________ Do You Yahoo!? Send FREE Valentine eCards with Yahoo! Greetings! http://greetings.yahoo.com From dgmaley@soli.inav.net Wed Feb 13 17:30:26 2002 From: dgmaley@soli.inav.net (David G. Maley) Date: Wed, 13 Feb 2002 11:30:26 -0600 (CST) Subject: [Yaesu] FT-920 In-Reply-To: <20020213143542.21918.qmail@web13603.mail.yahoo.com> Message-ID: Anthony; What CW filters are you using? Suggest that you check the Inrad web page and see if there might be a more suitable filter combination. Stock filters may not the best. Dave. WA0ZZG On Wed, 13 Feb 2002, Anthony Bowyer wrote: > Ok guys, I have a question. I traded my FT-920 for > an IC-746 and the more I use the 746, I really believe > the 920 is better, in several regards. The one thing I > didn't like about it was the blow-by with a narrow cw > filter. Any of you used them both and can offer any > suggestions? I have an opportunity to trade the 746 > for a 920, and I'm teetering a bit! I just hate to > have to buy more filters! But it is probably worth it! > > Thanks! > > Anthony > > ===== > NT4X > > __________________________________________________ > Do You Yahoo!? > Send FREE Valentine eCards with Yahoo! Greetings! > http://greetings.yahoo.com > _______________________________________________ > Yaesu mailing list > Yaesu@contesting.com > http://lists.contesting.com/mailman/listinfo/yaesu > From n5ql_jim@swbell.net Thu Feb 14 01:33:37 2002 From: n5ql_jim@swbell.net (Jim Clark) Date: Wed, 13 Feb 2002 19:33:37 -0600 Subject: [Yaesu] FT-920 In-Reply-To: <20020213143542.21918.qmail@web13603.mail.yahoo.com> Message-ID: <001701c1b4f7$9fba6800$f2eed840@swbell.net> The more I read about the 746 the happier I am with my 920 I have had for over 3 years. I use the 400 Hz Inrad and the dsp narrowed down on cw. Working pileups is still a bitch but I love the other 920 features. I won't have another rig without shuttle-jog! 73 de Jim, N5QL -----Original Message----- From: yaesu-admin@contesting.com [mailto:yaesu-admin@contesting.com] On Behalf Of Anthony Bowyer Sent: Wednesday, February 13, 2002 8:36 AM To: yaesu@contesting.com Subject: [Yaesu] FT-920 Ok guys, I have a question. I traded my FT-920 for an IC-746 and the more I use the 746, I really believe the 920 is better, in several regards. The one thing I didn't like about it was the blow-by with a narrow cw filter. Any of you used them both and can offer any suggestions? I have an opportunity to trade the 746 for a 920, and I'm teetering a bit! I just hate to have to buy more filters! But it is probably worth it! Thanks! Anthony ===== NT4X From k3ky@erols.com Wed Feb 13 19:59:13 2002 From: k3ky@erols.com (k3ky@erols.com) Date: Wed, 13 Feb 2002 14:59:13 -0500 Subject: [Yaesu] FT-920 In-Reply-To: References: <20020213143542.21918.qmail@web13603.mail.yahoo.com> Message-ID: <3C6A7F41.4600.7E9506B@localhost> Yes, the Inrad site is a good place to look. In fact, I read there that they offer a filter cascading kit that makes a day and night difference. I can say that filter cascading in general is very effective. That is now commonly implemented in high-end radios like the FT-1000. I read some very positive testimonials about the Inrad kit on their site. Sounds to me like it would be a very worthwhile addition to the radio. 73, David K3KY On 13 Feb 2002 at 11:30, David G. Maley wrote: > Anthony; > What CW filters are you using? Suggest that you check the Inrad web > page and see if there might be a more suitable filter combination. > Stock filters may not the best. Dave. WA0ZZG > > On Wed, 13 Feb 2002, Anthony Bowyer wrote: > > > Ok guys, I have a question. I traded my FT-920 for > > an IC-746 and the more I use the 746, I really believe > > the 920 is better, in several regards. The one thing I > > didn't like about it was the blow-by with a narrow cw > > filter. Any of you used them both and can offer any > > suggestions? I have an opportunity to trade the 746 > > for a 920, and I'm teetering a bit! I just hate to > > have to buy more filters! But it is probably worth it! > > > > Thanks! > > > > Anthony > > > > ===== > > NT4X > > > > __________________________________________________ > > Do You Yahoo!? > > Send FREE Valentine eCards with Yahoo! Greetings! > > http://greetings.yahoo.com > > _______________________________________________ > > Yaesu mailing list > > Yaesu@contesting.com > > http://lists.contesting.com/mailman/listinfo/yaesu > > > > _______________________________________________ > Yaesu mailing list > Yaesu@contesting.com > http://lists.contesting.com/mailman/listinfo/yaesu From akim@ptq.pemex.com Wed Feb 13 20:51:53 2002 From: akim@ptq.pemex.com (Lic. Andres Kim) Date: Wed, 13 Feb 2002 14:51:53 -0600 Subject: [Yaesu] FT1000 Question. Message-ID: This is a multi-part message in MIME format. ------=_NextPart_000_0003_01C1B49D.F9F8C5A0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Hi guys. I`m having problems with my ft1000D, very low power on 7Mhz,14, etc. (about 2,3 Watts) and in 28Mhz, got 10 Watts, yep 10 watts, does anyone knows what is the power measure that I need to have from RF UNIT rf out plug --> To RF IN plug in the PA Unit, In the tech. Manual does not appear that measure I beleive it should be in milliwatts, but don`t know the measure. If I know that measure I would be able to know if the problem is in the RF unit or PA unit If RF unit is not delivering the correct amount of ? millivolts Pa is not going to work ok. Thanks in advance. XE1KIM Andy Kim ------=_NextPart_000_0003_01C1B49D.F9F8C5A0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable

Hi guys.

I`m having problems = with my ft1000D, very low power on 7Mhz,14, etc. (about 2,3 = Watts)

and in 28Mhz, got 10 = Watts, yep 10 watts, does anyone knows what is the power measure that =

I need to have from RF = UNIT rf out plug =E0 To RF IN plug in the PA Unit, In the tech. = Manual does

not appear that = measure I beleive it should be in milliwatts, but don`t know the = measure.

If I know that measure = I would be able to know if the problem is in the RF unit or PA = unit

If RF unit is not = delivering the correct amount of ? millivolts Pa is not going to work = ok.

Thanks in = advance.

XE1KIM

Andy = Kim

------=_NextPart_000_0003_01C1B49D.F9F8C5A0-- From alfansome69@yahoo.com Fri Feb 15 01:31:35 2002 From: alfansome69@yahoo.com (Al Fansome) Date: Thu, 14 Feb 2002 17:31:35 -0800 (PST) Subject: [Yaesu] re: FT-920 Message-ID: <20020215013135.63692.qmail@web21101.mail.yahoo.com> I spoke to Inrad when I was considering filter mods in addition to those done by the previous owner. Inrad said there's an inherent blow-by flaw in the 920 that their filters wouldn't eliminate. Being a CW newbie, exactly what is blow-by and what would it sound like using a 500 Hz filter? Don Putnick KK6DP __________________________________________________ Do You Yahoo!? Send FREE Valentine eCards with Yahoo! Greetings! http://greetings.yahoo.com From n0nb@networksplus.net Fri Feb 15 03:35:07 2002 From: n0nb@networksplus.net (Nate Bargmann) Date: Thu, 14 Feb 2002 21:35:07 -0600 Subject: [Yaesu] re: FT-920 In-Reply-To: <20020215013135.63692.qmail@web21101.mail.yahoo.com> References: <20020215013135.63692.qmail@web21101.mail.yahoo.com> Message-ID: <20020215033507.GG312@localhost> * Al Fansome [2002 Feb 14 20:06 -0600]: > I spoke to Inrad when I was considering filter mods in > addition to those done by the previous owner. Inrad > said there's an inherent blow-by flaw in the 920 that > their filters wouldn't eliminate. > > Being a CW newbie, exactly what is blow-by and what > would it sound like using a 500 Hz filter? It's been about a year since I last used my '920 (still in the box from moving...gahh!), however I recall that it manifests itself as stray signals clearly beyond the filter passband. You will also notice it as hearing the signal "on the other side" of zero beat. I found that simply switching in the DSP even at its widest bandwidth eliminated the blowby. INRAD is correct, the 400 Hz filter I bought from them did not eliminate the blowby, but it sure allows the DSP to do its thing. The first time I encountered the blowby I was quite disappointed. But I think Yaesu opted to keep the radio in a lower price range and clean up the effect with the DSP. With this in mind, I've come to enjoy the capabilities of the '920. 73, de Nate >> -- Wireless | Amateur Radio Station N0NB | "We have awakened a Internet | n0nb@networksplus.net | sleeping giant and Location | Bremen, Kansas USA EM19ov | have instilled in him Amateur radio exams; ham radio; Linux info @ | a terrible resolve". http://www.qsl.net/n0nb/ | - Admiral Yamomoto From robert.vilhar@iskratr.si Fri Feb 15 09:58:55 2002 From: robert.vilhar@iskratr.si (vilhar) Date: Fri, 15 Feb 2002 10:58:55 +0100 Subject: [Yaesu] FT-1000mp synchronous vfo tuning? Message-ID: <3C6CDBDF.B71CDE69@iskratr.si> Hello! Is it possible to force ft1000mp's VFO's to be tuned synchronously? This would be great for some diversity reception scenarios like X-yagi EME operation with double synchronous xverter in font of ft1000mp (modified so that A antenna input is fed to the main RX and B antenna to the sub RX). 73 de Robi/s53ww From n1eu@hotmail.com Fri Feb 15 14:30:15 2002 From: n1eu@hotmail.com (Barry N1EU) Date: Fri, 15 Feb 2002 09:30:15 -0500 Subject: [Yaesu] FT-1000mp synchronous vfo tuning? Message-ID: Hi Robi, Info is on synchro tuning is available at http://www.angelfire.com/md/k3ky/page61.html There is also info on adding flexibility to the antenna selection at http://www.albany.net/~bg/Mods/1000DSubMod.htm I haven't personally added these mods, but hope to do so in the coming year. GL/73, Barry N1EU >From: vilhar >To: yaesu@contesting.com >Subject: [Yaesu] FT-1000mp synchronous vfo tuning? >Date: Fri, 15 Feb 2002 10:58:55 +0100 > >Hello! > >Is it possible to force ft1000mp's VFO's to be tuned synchronously? >This would be great for some diversity reception scenarios like X-yagi >EME operation with double synchronous xverter in font of ft1000mp >(modified so that A antenna input is fed to the main RX and B antenna to >the sub RX). > > >73 de Robi/s53ww > >_______________________________________________ >Yaesu mailing list >Yaesu@contesting.com >http://lists.contesting.com/mailman/listinfo/yaesu _________________________________________________________________ MSN Photos is the easiest way to share and print your photos: http://photos.msn.com/support/worldwide.aspx From akim@ptq.pemex.com Fri Feb 15 14:47:56 2002 From: akim@ptq.pemex.com (Lic. Andres Kim) Date: Fri, 15 Feb 2002 08:47:56 -0600 Subject: [Yaesu] RF Problem Message-ID: This is a multi-part message in MIME format. ------=_NextPart_000_0022_01C1B5FD.76C219F0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Hi guys. I`m having problems with my ft1000D, very low power on 7Mhz,14, etc. (about 2,3 Watts) and in 28Mhz, got 10 Watts, yep 10 watts, does anyone knows what is the power measure that I need to have from RF UNIT rf out plug --> To RF IN plug in the PA Unit, In the tech. Manual does not appear that measure I beleive it should be in milliwatts, but don`t know the measure. If I know that measure I would be able to know if the problem is in the RF unit or PA unit If RF unit is not delivering the correct amount of ? millivolts Pa is not going to work ok. Thanks in advance. XE1KIM Andy Kim ------=_NextPart_000_0022_01C1B5FD.76C219F0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable

Hi = guys.

I`m having problems = with my ft1000D, very low power on 7Mhz,14, etc. (about 2,3 = Watts)

and in 28Mhz, got 10 = Watts, yep 10 watts, does anyone knows what is the power measure that =

I need to have from RF = UNIT rf out plug =E0 To RF IN plug in the PA Unit, In the tech. = Manual does

not appear that = measure I beleive it should be in milliwatts, but don`t know the = measure.

If I know that measure = I would be able to know if the problem is in the RF unit or PA = unit

If RF unit is not = delivering the correct amount of ? millivolts Pa is not going to work = ok.

Thanks in = advance.

XE1KIM

Andy = Kim

------=_NextPart_000_0022_01C1B5FD.76C219F0-- From dgmaley@soli.inav.net Fri Feb 15 16:11:17 2002 From: dgmaley@soli.inav.net (David G. Maley) Date: Fri, 15 Feb 2002 10:11:17 -0600 (CST) Subject: [Yaesu] re: FT-920 In-Reply-To: <20020215033507.GG312@localhost> Message-ID: The term 'blowby, as I understand it, refers to an effect where some of the undesired signal will leak around the main filter. The issues here are the ultimate rejection level of a filter and the mounting method used for the filter. If a good filter is improperly mounted, some stray capacitance will exist between the input and output and allow a small amount of signal to get around it. This is why you see some radios have the main filter on a seperate board. We are talking a situation where you need to maintain 90-100db of isolation with just one filter. With two filters, the job gets easier. Dave WA0ZZG On Thu, 14 Feb 2002, Nate Bargmann wrote: > * Al Fansome [2002 Feb 14 20:06 -0600]: > > I spoke to Inrad when I was considering filter mods in > > addition to those done by the previous owner. Inrad > > said there's an inherent blow-by flaw in the 920 that > > their filters wouldn't eliminate. > > > > Being a CW newbie, exactly what is blow-by and what > > would it sound like using a 500 Hz filter? > > It's been about a year since I last used my '920 (still in the box from > moving...gahh!), however I recall that it manifests itself as stray > signals clearly beyond the filter passband. You will also notice it as > hearing the signal "on the other side" of zero beat. I found that > simply switching in the DSP even at its widest bandwidth eliminated the > blowby. INRAD is correct, the 400 Hz filter I bought from them did not > eliminate the blowby, but it sure allows the DSP to do its thing. > > The first time I encountered the blowby I was quite disappointed. But I > think Yaesu opted to keep the radio in a lower price range and clean up > the effect with the DSP. With this in mind, I've come to enjoy the > capabilities of the '920. > > 73, de Nate >> > > From k3ky@erols.com Fri Feb 15 18:55:00 2002 From: k3ky@erols.com (k3ky@erols.com) Date: Fri, 15 Feb 2002 13:55:00 -0500 Subject: [Yaesu] FT-1000mp synchronous vfo tuning? In-Reply-To: Message-ID: <3C6D1334.1386.1E3CF9B@localhost> Thanks Barry, but please note that the G3TKF Synchro Mod on the K3KY web page applies only to the older FT-1000D and not to the MP versions. Sorry. 73, David K3KY On 15 Feb 2002 at 9:30, Barry N1EU wrote: > Hi Robi, > > Info is on synchro tuning is available at > http://www.angelfire.com/md/k3ky/page61.html > > There is also info on adding flexibility to the antenna selection at > http://www.albany.net/~bg/Mods/1000DSubMod.htm > > I haven't personally added these mods, but hope to do so in the coming > year. > > GL/73, > Barry N1EU > > > >From: vilhar > >To: yaesu@contesting.com > >Subject: [Yaesu] FT-1000mp synchronous vfo tuning? > >Date: Fri, 15 Feb 2002 10:58:55 +0100 > > > >Hello! > > > >Is it possible to force ft1000mp's VFO's to be tuned synchronously? > >This would be great for some diversity reception scenarios like > >X-yagi EME operation with double synchronous xverter in font of > >ft1000mp (modified so that A antenna input is fed to the main RX and > >B antenna to the sub RX). > > > > > >73 de Robi/s53ww > > > >_______________________________________________ > >Yaesu mailing list > >Yaesu@contesting.com > >http://lists.contesting.com/mailman/listinfo/yaesu > > > _________________________________________________________________ MSN > Photos is the easiest way to share and print your photos: > http://photos.msn.com/support/worldwide.aspx > > _______________________________________________ > Yaesu mailing list > Yaesu@contesting.com > http://lists.contesting.com/mailman/listinfo/yaesu From k3ky@erols.com Fri Feb 15 19:29:19 2002 From: k3ky@erols.com (k3ky@erols.com) Date: Fri, 15 Feb 2002 14:29:19 -0500 Subject: [Yaesu] FT-1000mp synchronous vfo tuning? In-Reply-To: <3C6CDBDF.B71CDE69@iskratr.si> Message-ID: <3C6D1B3F.14354.2033AC8@localhost> Dear Robi- There has been a mod for true dual receive in the FT-1000MP but it was very complicated and I do not particularly recommend it. This mod was done by a JA ham. You can see an english translation on the web page of WD8ARZ http://www.qsl.net/va3cr/main/dual%20receive%20mod.htm There is also a url for a Japanese web site. For some reason, the WD8ARZ website is no longer serving the photos. In all seriousness, if you really want to do true antenna diversity work, it would be easier to just get yourself an FT-1000D. In the D model, all you need to do is set an internal switch to "E BPF" and turn on the Rx Ant front panel switch and then hook up 2 antennas to 2 coax connectors. If you buy an old FT-1000 without the BPF-1 option, then you need to buy a BPF-1 and plug it in the radio. The MP mod involves going out and buying a BPF-1 (surprise!) just like is used in the 1000D. Then you buiuld it in a case with some glue logic to translate the different band control signals that exist in the MP and send them to the BPF-1. You will also need to get hold of a special custom ROM from the JA ham who designed this box. If I remember right, you also have to do some minor mods inside the MP to accommodate the BPF-1 box. Then you can do diversity receive. Sad to say, not many hams were using the diversity capabilities in the 1000D, so when Yaesu released the MP design, it did not really contain *complete* separate receivers. The sub-rx in the MP shares the bandpass filters with the main receiver, and there is *no provision* for plugging in a separate BPF subassembly as in the 1000D. So a stock MP cannot do true antenna diversity- it also cannot do crossband diversity where you listen to 2 different bands on 2 different antennas in 2 different earphones at the same time. The MP can tune both receiver VFOs at the same time, I am told- you hold down some button with one hand while tuning the main tuning knob with the other hand and both VFOs will track. This is very tiring for your finger, however. :o) I like the G3TKF Synchro mod a lot better- but this is only for the 1000D. You just press SPOT to slave the 2 VFOs, then A>B to sync them up, then start tuning. This mod is one of the most outstanding and effective mods to a radio I have seen in many years. http://www.angelfire.com/md/k3ky/page61.html I can say that all the work to install the Synchro mod and a BPF-1 in my FT-1000 (now a 1000D) was definitely worth it. You must hear it to believe it. Diversity reception in weak-signal HF DXing is simply awesome! Highly recommended. Note that you must have enough room for multiple HF antennas to make antenna diversity receiving work right. 73, David K3KY On 15 Feb 2002 at 10:58, vilhar wrote: > Hello! > > Is it possible to force ft1000mp's VFO's to be tuned synchronously? > This would be great for some diversity reception scenarios like X-yagi > EME operation with double synchronous xverter in font of ft1000mp > (modified so that A antenna input is fed to the main RX and B antenna > to the sub RX). > > > 73 de Robi/s53ww > > _______________________________________________ > Yaesu mailing list > Yaesu@contesting.com > http://lists.contesting.com/mailman/listinfo/yaesu From n1eu@hotmail.com Fri Feb 15 19:41:44 2002 From: n1eu@hotmail.com (Barry N1EU) Date: Fri, 15 Feb 2002 14:41:44 -0500 Subject: [Yaesu] FT-1000mp synchronous vfo tuning? Message-ID: Oops. I forgot to add the step of trading the 1000MP for a 1000D ;-) 73, Barry N1EU >From: k3ky@erols.com >To: "Barry N1EU" , >yaesu-admin@contesting.com, robert.vilhar@iskratr.si, > yaesu@contesting.com >Subject: Re: [Yaesu] FT-1000mp synchronous vfo tuning? >Date: Fri, 15 Feb 2002 13:55:00 -0500 > >Thanks Barry, but please note that the G3TKF Synchro Mod >on the K3KY web page applies only to the older FT-1000D and >not to the MP versions. Sorry. 73, David K3KY > >On 15 Feb 2002 at 9:30, Barry N1EU wrote: > > > Hi Robi, > > > > Info is on synchro tuning is available at > > http://www.angelfire.com/md/k3ky/page61.html > > > > There is also info on adding flexibility to the antenna selection at > > http://www.albany.net/~bg/Mods/1000DSubMod.htm > > > > I haven't personally added these mods, but hope to do so in the coming > > year. > > > > GL/73, > > Barry N1EU > > > > > > >From: vilhar > > >To: yaesu@contesting.com > > >Subject: [Yaesu] FT-1000mp synchronous vfo tuning? > > >Date: Fri, 15 Feb 2002 10:58:55 +0100 > > > > > >Hello! > > > > > >Is it possible to force ft1000mp's VFO's to be tuned synchronously? > > >This would be great for some diversity reception scenarios like > > >X-yagi EME operation with double synchronous xverter in font of > > >ft1000mp (modified so that A antenna input is fed to the main RX and > > >B antenna to the sub RX). > > > > > > > > >73 de Robi/s53ww > > > > > >_______________________________________________ > > >Yaesu mailing list > > >Yaesu@contesting.com > > >http://lists.contesting.com/mailman/listinfo/yaesu > > > > > > _________________________________________________________________ MSN > > Photos is the easiest way to share and print your photos: > > http://photos.msn.com/support/worldwide.aspx > > > > _______________________________________________ > > Yaesu mailing list > > Yaesu@contesting.com > > http://lists.contesting.com/mailman/listinfo/yaesu > > _________________________________________________________________ Chat with friends online, try MSN Messenger: http://messenger.msn.com From esa.p.korhonen@nokia.com Fri Feb 15 20:29:00 2002 From: esa.p.korhonen@nokia.com (esa.p.korhonen@nokia.com) Date: Fri, 15 Feb 2002 14:29:00 -0600 Subject: [Yaesu] FT-1000mp synchronous vfo tuning? Message-ID: <4F9E27AC0ACCA64CBF86DBC61D553C7A0845FC@daebe003.NOE.Nokia.com> Hello to the list, just as a side note; the diversity receive works great with an SO2R-contest type setup. Two radios and a two-radio box to handle the audio. If you have two radios, this is definately the easiest way to implement it. Cheap as well, if you only want the two-radio box to control the audio only, radio A or radio B or A+B. Real simple and you don't have to touch the radios. The commercially available boxes, such as WX0B SO2R-Master or Top Ten Devices DX-Doubler are great, but a little bit expensive for this purpose only. I have the SO2R-Master, but I'm doing a lot of contesting as well. 73. Esa w5/oh7wv -----Original Message----- From: ext k3ky@erols.com [mailto:k3ky@erols.com] Sent: Friday, February 15, 2002 1:29 PM To: vilhar; yaesu@contesting.com Subject: Re: [Yaesu] FT-1000mp synchronous vfo tuning? Dear Robi- There has been a mod for true dual receive in the FT-1000MP but it was very complicated and I do not particularly recommend it. This mod was done by a JA ham. You can see an english translation on the web page of WD8ARZ http://www.qsl.net/va3cr/main/dual%20receive%20mod.htm There is also a url for a Japanese web site. For some reason, the WD8ARZ website is no longer serving the photos. In all seriousness, if you really want to do true antenna diversity work, it would be easier to just get yourself an FT-1000D. In the D model, all you need to do is set an internal switch to "E BPF" and turn on the Rx Ant front panel switch and then hook up 2 antennas to 2 coax connectors. If you buy an old FT-1000 without the BPF-1 option, then you need to buy a BPF-1 and plug it in the radio. The MP mod involves going out and buying a BPF-1 (surprise!) just like is used in the 1000D. Then you buiuld it in a case with some glue logic to translate the different band control signals that exist in the MP and send them to the BPF-1. You will also need to get hold of a special custom ROM from the JA ham who designed this box. If I remember right, you also have to do some minor mods inside the MP to accommodate the BPF-1 box. Then you can do diversity receive. Sad to say, not many hams were using the diversity capabilities in the 1000D, so when Yaesu released the MP design, it did not really contain *complete* separate receivers. The sub-rx in the MP shares the bandpass filters with the main receiver, and there is *no provision* for plugging in a separate BPF subassembly as in the 1000D. So a stock MP cannot do true antenna diversity- it also cannot do crossband diversity where you listen to 2 different bands on 2 different antennas in 2 different earphones at the same time. The MP can tune both receiver VFOs at the same time, I am told- you hold down some button with one hand while tuning the main tuning knob with the other hand and both VFOs will track. This is very tiring for your finger, however. :o) I like the G3TKF Synchro mod a lot better- but this is only for the 1000D. You just press SPOT to slave the 2 VFOs, then A>B to sync them up, then start tuning. This mod is one of the most outstanding and effective mods to a radio I have seen in many years. http://www.angelfire.com/md/k3ky/page61.html I can say that all the work to install the Synchro mod and a BPF-1 in my FT-1000 (now a 1000D) was definitely worth it. You must hear it to believe it. Diversity reception in weak-signal HF DXing is simply awesome! Highly recommended. Note that you must have enough room for multiple HF antennas to make antenna diversity receiving work right. 73, David K3KY On 15 Feb 2002 at 10:58, vilhar wrote: > Hello! > > Is it possible to force ft1000mp's VFO's to be tuned synchronously? > This would be great for some diversity reception scenarios like X-yagi > EME operation with double synchronous xverter in font of ft1000mp > (modified so that A antenna input is fed to the main RX and B antenna > to the sub RX). > > > 73 de Robi/s53ww > > _______________________________________________ > Yaesu mailing list > Yaesu@contesting.com > http://lists.contesting.com/mailman/listinfo/yaesu _______________________________________________ Yaesu mailing list Yaesu@contesting.com http://lists.contesting.com/mailman/listinfo/yaesu From John Langridge" This is a multi-part message in MIME format. ------=_NextPart_000_000E_01C1B72E.AF821100 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Greetings all! I have owned an ft-920 for almost a year now. I purchased one used, in = mint condition and I knew for a fact that it had very little use. After a few weeks of use, I noticed that the power would drop on all = bands after the unit had been on for a while. The power drops were most = notable on 10,15 and 40 meters. The power drops were from 100watts at = power up down to 50 watts after heating up (10-20 minutes without = transmitting, 5 minutes if transmitting). It is also important to note = that the SWR is registering 1:1 at the points where my antennas are = resonant and the tuner is not in line. Putting the tuner in line where = the SWR is high takes care of the SWR but does not seem to effect the = power problem. I had the unit worked on by Houston Amateur Supply and they did a good = job... They didnt find a lot wrong with it, but did align a few things = and did replace a few suspect components, none of which I know of at = this time - Thats what they told me, anyway, and I have no reason to = doubt it. About 1 week ago, I started noticing the same problem again. After = turning the rig off for only 10 minutes and powering back up, the max = power returns to 100 watts... It seems obvious that a component is = crapping out as it heats up, but where do I start in trying to find it? = My intial thoughts tell me to get a can of electronics grade freon and = see if I can find the intermittent component, but the FT-920 is a big = rig and that could be quite difficult... I do not have access to a = technicians manual right now... any ideas? Thanks in advance... John KB5NJD Duncanville, Texas EM12np ------=_NextPart_000_000E_01C1B72E.AF821100 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable

Greetings all!

I have owned an ft-920 for almost a = year now. =20 I purchased one used, in mint condition and I knew for a fact that it = had very=20 little use.

After a few weeks of use, I noticed = that the power=20 would drop on all bands after the unit had been on for a while. = The power=20 drops were most notable on 10,15 and 40 meters. The power drops = were from=20 100watts at power up down to 50 watts after heating up (10-20 minutes = without=20 transmitting, 5 minutes if transmitting). It is also important to = note=20 that the SWR is registering 1:1 at the points where my antennas are = resonant and=20 the tuner is not in line. Putting the tuner in line where the SWR = is high=20 takes care of the SWR but does not seem to effect the power=20 problem.

I had the unit worked on by Houston = Amateur Supply=20 and they did a good job... They didnt find a lot wrong with it, but did = align a=20 few things and did replace a few suspect components, none of which I = know of at=20 this time - Thats what they told me, anyway, and I have no reason to = doubt=20 it.

About 1 week ago, I started noticing = the same=20 problem again. After turning the rig off for only 10 minutes and = powering=20 back up, the max power returns to 100 watts... It seems obvious that a = component=20 is crapping out as it heats up, but where do I start in trying to find = it? =20 My intial thoughts tell me to get a can of electronics grade freon and = see if I=20 can find the intermittent component, but the FT-920 is a big rig and = that could=20 be quite difficult... I do not have access to a technicians manual right = now...

any ideas?

Thanks in advance...

John KB5NJD

Duncanville, Texas

EM12np

------=_NextPart_000_000E_01C1B72E.AF821100-- ---------------------------------------------------- Sign Up for NetZero Platinum Today Only $9.95 per month! http://my.netzero.net/s/signup?r=platinum&refcd=PT97 From Paul Matthews" This is a multi-part message in MIME format. ------=_NextPart_000_000F_01C1B946.7B3C8E60 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hello All, Thanks for reading.=20 I would like to know how well the 920 works on 6m. I am especially interested in how well the tuner works on 6m. Any comments will be greatly appreciated. 73, Paul KB4GYT ------=_NextPart_000_000F_01C1B946.7B3C8E60 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable

Hello All,

Thanks for reading.

I would like to know how well the 920 works on=20 6m.

I am especially interested in how well the tuner = works on=20 6m.

Any comments will be greatly = appreciated.

73, Paul KB4GYT

------=_NextPart_000_000F_01C1B946.7B3C8E60-- From Jpabhb@aol.com Tue Feb 19 19:00:14 2002 From: Jpabhb@aol.com (Jpabhb@aol.com) Date: Tue, 19 Feb 2002 14:00:14 EST Subject: [Yaesu] FT 920 Info Please Message-ID: <15f.9138d95.29a3fabe@aol.com> Mine works great. The tuner loaded up my 40 meter dipole until I made one for 6. 73 de John, AA7VL From Mi5rjs@btopenworld.com Tue Feb 19 23:04:06 2002 From: Mi5rjs@btopenworld.com (Robert Scott) Date: Tue, 19 Feb 2002 23:04:06 -0000 Subject: [Yaesu] feedback Message-ID: <004101c1b999$dcef7520$02000003@robinscott> This is a multi-part message in MIME format. ------=_NextPart_000_003E_01C1B999.BB592140 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable I was wondering did you get your feed back problem fixed as I have a = FT1000MP and I have the same problem and have contacted Yaesu UK and = they have never heard of it before HI HI so maybe you could let me know = if you got any joy on how to fix it would much appreciate it if you = could let me know cheers MI5RJS Robin Londonderry Northern Ireland. ------=_NextPart_000_003E_01C1B999.BB592140 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable

I was wondering did you get your feed back problem = fixed as I=20 have a FT1000MP and I have the same problem and have contacted Yaesu UK = and they=20 have never heard of it before HI HI so maybe you could let me know if = you got=20 any joy on how to fix it would much appreciate it if you could let me = know=20 cheers MI5RJS Robin Londonderry Northern = Ireland.

------=_NextPart_000_003E_01C1B999.BB592140-- From =?iso-8859-1?Q?Gustavo_Fabi=E1n_Paredes?= Tue Feb 19 15:00:00 2002 From: =?iso-8859-1?Q?Gustavo_Fabi=E1n_Paredes?= (=?iso-8859-1?Q?Gustavo_Fabi=E1n_Paredes?=) Date: Tue, 19 Feb 2002 12:00:00 -0300 Subject: [Yaesu] FTL-2011 Message-ID: <007501c1b956$393cdaa0$58d30dd1@pc1> This is a multi-part message in MIME format. ------=_NextPart_000_006A_01C1B93C.F57D7220 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hi. I need the schematics of FRB-2 programming interface box or the VPL-1 = and appropiate cable, for programming the FTL-2011. Can anybody help me?. Thanks in advance. Gustavo - LU8JKT ------=_NextPart_000_006A_01C1B93C.F57D7220 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable

Hi.

I need the schematics of FRB-2 = programming=20 interface box or the VPL-1 and appropiate cable, for programming the=20 FTL-2011.

Can anybody help me?.

Thanks in advance.

Gustavo - = LU8JKT

------=_NextPart_000_006A_01C1B93C.F57D7220-- From jklinkhamer@thorntoninc.com Thu Feb 21 21:07:50 2002 From: jklinkhamer@thorntoninc.com (Jon Klinkhamer) Date: Thu, 21 Feb 2002 16:07:50 -0500 Subject: [Yaesu] 3SK51 Mixer problem Message-ID: I have a 22Mhz and a 50Mhz signal going into a balanced MOSFET, 3SK51. I'm expecting a 28Mhz signal output after a low pass pi filter. My problem is that the 22Mhz is always on the output according to my scope and freq counter. The circuit seems straight forward enough. I tried two different FETs with the same result. Is there anybody out there that can steer me in the right direction? Thanks, Jon KB1DC From alfansome69@yahoo.com Fri Feb 22 18:14:37 2002 From: alfansome69@yahoo.com (Al Fansome) Date: Fri, 22 Feb 2002 10:14:37 -0800 (PST) Subject: [Yaesu] Re: 3SK51 Mixer problem In-Reply-To: <200202221703.g1MH3dVw007980@contesting.com> Message-ID: <20020222181437.61860.qmail@web21108.mail.yahoo.com> > I have a 22Mhz and a 50Mhz signal going into a > balanced MOSFET, 3SK51. I'm > expecting a 28Mhz signal output after a low pass pi > filter. My problem is > that the 22Mhz is always on the output according to > my scope and freq > counter. The circuit seems straight forward enough. > I tried two different > FETs with the same result. Is there anybody out > there that can steer me in > the right direction? I could easily be wrong, but I thought the output of a mixer is the original signals along with their sum and difference products. Thus you would need a bandpass filter (instead of a low pass filter) to pass the 28MHz and reject the 22MHz. __________________________________________________ Do You Yahoo!? Yahoo! Sports - Coverage of the 2002 Olympic Games http://sports.yahoo.com From wa3gin@erols.com Sun Feb 24 18:12:49 2002 From: wa3gin@erols.com (David Jordan) Date: Sun, 24 Feb 2002 13:12:49 -0500 Subject: [Yaesu] PC INTERFACE CABLE Message-ID: <3C792D21.1DED4F0E@erols.com> Hi Folks, I have the PC interface cable for the FT900 and FT1000D is anyone is interested in playing with this feature both cables are for sale. Both are in like new condition and work. I'll sell them for $10 off new price. thanks, dave wa3gin From akim@ptq.pemex.com Wed Feb 27 18:01:56 2002 From: akim@ptq.pemex.com (Lic. Andres Kim) Date: Wed, 27 Feb 2002 12:01:56 -0600 Subject: [Yaesu] From millivolts to milliwatts. Message-ID: This is a multi-part message in MIME format. ------=_NextPart_000_0000_01C1BF86.8DED3320 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Does anyone know a formula to convert millivolts to milliwatts ?? I have 1 Volt comming out from the RF Unit to PA Unit on a FT1000 But I need to know in milliwatts not in volts......so looking at the PA topology Will know if power comming out from RF unit is ok.. Thanks in advance. Andy Kim XE1KIM ------=_NextPart_000_0000_01C1BF86.8DED3320 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable

Does anyone know a = formula to convert millivolts to milliwatts ??

I have 1 Volt comming = out from the RF Unit to PA Unit on a FT1000

But I need to know in milliwatts not in volts......so looking at the PA = topology

Will know if power = comming out from RF unit is ok..

Thanks in = advance.

Andy = Kim

XE1KIM

------=_NextPart_000_0000_01C1BF86.8DED3320-- From akim@ptq.pemex.com Wed Feb 27 19:50:39 2002 From: akim@ptq.pemex.com (Lic. Andres Kim) Date: Wed, 27 Feb 2002 13:50:39 -0600 Subject: [Yaesu] That`s the question... Message-ID: This is a multi-part message in MIME format. ------=_NextPart_000_0003_01C1BF95.BE256A80 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Hmmm, yes formula P=e*e/r, could be because P in watts=in volts/in ohms, but what impedance ?? Because this is a jumper that goes from RF unit board to PA unit board, I`m not sure if I can take In count the impedance of 50 Ohms, (because that the resistance of the line), and this is between Stages. XE1KIM ------=_NextPart_000_0003_01C1BF95.BE256A80 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable

Hmmm, yes formula = P=3De*e/r, could be because P in watts=3Din volts/in ohms, but what impedance = ??

Because this is a = jumper that goes from RF unit board to PA unit board, I`m not sure if I can = take

In count the impedance = of 50 Ohms, (because that the resistance of the line), and this is between =

Stages.

XE1KIM

------=_NextPart_000_0003_01C1BF95.BE256A80-- From W8EK@fdt.net Wed Feb 27 20:36:27 2002 From: W8EK@fdt.net (Ken Simpson, W8EK) Date: Wed, 27 Feb 2002 15:36:27 -0500 Subject: [Yaesu] Yaesu YM-24 speaker Mic FS Message-ID: <03ab01c1bfce$6f307760$6791d4d1@toshiba> I have too many speaker mics -- especially for HTs I no longer have, so they should go to others who can use them. Yaesu YM-24 A This one has the little round (about 3/8 inch diameter), strange 6 pin connector that Yaesu, Wilson, Santec, and some others used. $ 20 Azden SDX-316 This is the rounder style speaker mic that fits nicely in the palm of your hand. Has 3.5 mm and 2.5 mm plugs for Azden, Icom, some Yaesu, and others. $ 20 Prices do not include shipping from Florida. Thanks. 73, Ken, W8EK Ken Simpson E-mail to W8EK@fdt.net or W8EK@yahoo.com Voice Phone (352) 732-8400 From tfiebig@juno.com Tue Feb 26 13:28:59 2002 From: tfiebig@juno.com (tfiebig@juno.com) Date: Tue, 26 Feb 2002 13:28:59 GMT Subject: [Yaesu] FT-726R for Sale Message-ID: <20020226.082924.23929.15704@wm2.jersey.juno.com> I have a FT-726R that I would like to sell. * 2 and 6 meters modules. *~ 10 watts out * 110VAC and 12VDC ( I may have 12V cable) * Manual & technical supplement * Original mike If interested tfiebig@juno.com 73 Tim/K2TF From wa3gin@erols.com Thu Feb 28 12:53:09 2002 From: wa3gin@erols.com (David Jordan) Date: Thu, 28 Feb 2002 07:53:09 -0500 Subject: [Yaesu] FT1000/D FS Message-ID: <3C7E2835.C749D5A9@erols.com> --------------3A90F1A0037BD54B8DEE30AB Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hi Folks, Yaesu FT1000 with upgrades to "D" version, 300,000 seriel number. Excellent condition, at least a 9.0 w/ original boxes Pair of matching SP-5 speakers (w/LL5 phone patch and Timewave DSP59) MH-1 mic W1GEE PC interface cable Shop Manual as well as operating manual Full-output & susper selectivety on receive Beautiful rig email direct please... serious buyers only... 1st listing on the internet $2800 plus shipping or u pick-up 73s, dave wa3gin non-smoker telecom engineer --------------3A90F1A0037BD54B8DEE30AB Content-Type: text/html; charset=us-ascii Content-Transfer-Encoding: 7bit
Hi Folks,

Yaesu FT1000 with upgrades to "D" version, 300,000 seriel number.
Excellent condition, at least a 9.0 w/ original boxes
Pair of matching SP-5 speakers (w/LL5 phone patch and Timewave DSP59)
MH-1 mic
W1GEE PC interface cable
Shop Manual as well as operating manual
Full-output & susper selectivety on receive
Beautiful rig

email direct please...
serious buyers only...
1st listing on the internet
$2800 plus shipping or u pick-up

73s,
dave
wa3gin
non-smoker telecom engineer

--------------3A90F1A0037BD54B8DEE30AB--