[Yaesu] ft-1o1b

[Firson Maryutenli]

Sorry,
You need insulated screwdriver to trim that capacitor.
Because 300 volt present on that circuit.

Firson - YC0LZH
----- Original Message -----
From: Firson Maryutenli <firson at indosat.net.id>
To: <SGTOKIE at aol.com>; <yaesu at contesting.com>
Sent: Saturday, August 28, 2021 7:24 PM
Subject: Re: [Yaesu] ft-1o1b


> I have same experience with FT-101ZD.
> My opinion,
> When you have normal output with others band, the problem not on tube
> driver.
> It's need to trim the capacitor trimers below chasis on that 101b, you
> should trim the capacitor to max output.
>
> Trim the capasitor related to 15 and 10 meter only, you should know which
> one that should be trimed.
>
> Firson - YC0LZH
> ----- Original Message -----
> From: <SGTOKIE at aol.com>
> To: <yaesu at contesting.com>
> Sent: Saturday, August 30, 2003 3:10 PM
> Subject: [Yaesu] ft-1o1b
>
>
> > i recently purchased a 101b that had decreased output on 15 & 10m. the
guy
> said the driver may be getting bad.....if i replace just the driver tube,
do
> i need to do any special realignment?........de kd5qwo. david howard
> > _______________________________________________
> > Yaesu mailing list
> > Yaesu at contesting.com
> > http://lists.contesting.com/mailman/listinfo/yaesu
>