[Yaesu] FT1000D PKT

[Joe Subich, K4IK]

Paul, 

What are you trying to accomplish?  In PKT the FT-1000MP does 
the following: 

   1) Offset the display to the "center of the channel" (i.e., 
      half way between the expected mark/space tone ... -2125 Hz 
      default - Menu 6-3, 6-4 and 6-5) 
   2) set the RX BFO to 457.125 kHz 
   3) Set the TX BFO to 457.125 kHz
   4) Select LSB (i.e., BFO is above RX/TX freq)
   5) Select the last IF filters used in PKT 
   6) Select audio input from the PKT (DIN-5) jack 

What you're hearing probably isn't the filtering ... it's the 
BFO offset (set up to pass audio at 2125 HZ +/- 1200 Hz).  

73, 

   ... Joe, K4IK 
 



> -----Original Message-----
> From: Paul Carr [mailto:paulcarr at barrow.com] 
> Sent: Saturday, November 01, 2003 8:46 PM
> To: Joe Subich, K4IK
> Cc: yaesu at contesting.com
> Subject: Re: [Yaesu] FT1000D PKT
> 
> 
> It would help if I could remember which radio  have!  Sorry for the 
> confusion.
> 
> Its the FT1000MP.
> 
> The difference between the filtering that takes place in LSB/USB mode 
> versus PKT/RTTY mode is considerable.  There does not appear 
> to be any method to change that.
>