[Yaesu] FT-897 CAT, Linear and Band Data

[Stewart GM4AFF]

For info, I have found a (cheap) way to do this - CAT data can be obtained
from the Mic socket if menu  #59 is set to CAT, then linear switch and band
data can be obtained from the rear socket. Many thanks to those who replied
with suggestions. See http://www.k6xx.com/radio/ft857ser.pdf for solution.
73
Stewart
GM4AFF

-----Original Message-----
From: yaesu-bounces at contesting.com
[mailto:yaesu-bounces at contesting.com]On Behalf Of Stewart GM4AFF
Sent: 30 September 2005 23:03
To: yaesu at contesting.com
Subject: [Yaesu] FT-897 CAT, Linear and Band Data


Anyone got any info on how I might be able to use CAT, linear control and
band data outputs all at the same time on an FT-897D?

Stewart
GM4AFF

_______________________________________________
Yaesu mailing list
Yaesu at contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu