[Yaesu] FT-990 EPROMUpgrade
Joe Subich, W4TV
w4tv at subich.com
Tue Aug 8 00:14:37 EDT 2006
The newer firmware (1.13) added the "short update" responses -
in particular: 16 bytes of data (current operating parameters -
command xx 00 00 02 10H) or 32 bytes of data (VFO A and VFO B -
command xx 00 00 03 10H).
Previous version of the firmware would only report all 1508
bytes (the "full dump" - command xx 00 00 00 10H) containing
VFO A, VFO B, all memories and the "Flags" data.
Both N1MM Logger and Writelog require the 32 byte format report.
... Joe Subich, W4TV
support at microham.com
> -----Original Message-----
> From: yaesu-bounces at contesting.com
> [mailto:yaesu-bounces at contesting.com] On Behalf Of Richard
> DiDonna NN3W
> Sent: Monday, August 07, 2006 8:10 PM
> To: RFD; yaesu at contesting.com
> Subject: Re: [Yaesu] FT-990 EPROMUpgrade
> Being a total newbie and being in the process of computer
> controlling my FT-990, what does the EPROM v.1.3 (which mine
> has) allow one to do that an older model would not.
> BTW, to computer control the rig is there a specific jack
> that is needed to connect to a laptop or desktop??
> 73 Rich NN3W
> ----- Original Message -----
> From: "RFD" <fdavis at nfld.net>
> To: <yaesu at contesting.com>
> Sent: Monday, August 07, 2006 6:37 PM
> Subject: [Yaesu] FT-990 EPROMUpgrade
> > I have made a telephone call to YAESU Tech support and was
> told that the
> > ROM upgrade for the 990 is no longer available.
> > Frank Davis
> > VO1HP
> > _______________________________________________
> > Yaesu mailing list
> > Yaesu at contesting.com
> > http://lists.contesting.com/mailman/listinfo/yaesu
> Yaesu mailing list
> Yaesu at contesting.com
More information about the Yaesu