[Yaesu] FT-990 linear connections

[Joe Subich, W4TV]

Rich,

This FT-1000MP information is applicable to the FT-990:
   http://www.qsl.net/n1eu/Yaesu/MPAcom.htm

73,

    ... Joe, W4TV



> -----Original Message-----
> From: yaesu-bounces at contesting.com
> [mailto:yaesu-bounces at contesting.com] On Behalf Of Richard DiDonna
> Sent: Friday, January 13, 2006 12:37 PM
> To: yaesu at contesting.com
> Subject: [Yaesu] FT-990 linear connections
>
>
> I'm wiring up a DIN plug to connect a FT-990 to an AL80A (a
> full QSK linear).   Ive connected the neutral and hot pins.
> However, IIRC, the manual states that you connect Pin 3 and
> pin 8 with a jumper.  The diagram appears to show pin 8 to pin 5.
>
> Which are the correct pins to use?
>
> 73 Rich NN3W
>
> _______________________________________________
> Yaesu mailing list
> Yaesu at contesting.com
> http://lists.contesting.com/mailman/listinfo/yaesu
>
>