[Yaesu] FT-107m wiring for meter control switch

[ryan macleod]

I have an early model FT-107m, this model has a meter control switch located
in between the frequency display and the multi function meter. The meter
should have the following functions (from left to right) VCC - IC - ALC  -
COMP - FWD - REF.  My problem is that some of the wires have managed to
brake away from the switch contacts. I have looked at the service manual but
have been unable to identify the wires locations because the manual is not
color coded and I don't really want to tear the radio apart to trace all of
them back to there starting location. Does anybody know the location of the
following wires on the switch:
solid Purple (with top cover removed I think this is near the top on the
back row of contacts)
solid Grey   (I think this one is next to purple, going clock wise )

The following are somewhere on the bottom half I think, judging by the wire
lengths but I just don't know which points to solder them to.
solid Yellow
solid orange
White with purple stripe