[Yaesu] Ft-2500M

[Larry Strasser]

I have a power fold back problem with my FT2500M.

On high power I can advance the pot to get about 30 watts on a 
particular frequency. When I re-key the power sometimes comes back to 
30w, other times its 5watts.If I keep keying it comes back.

The input voltage is 13.8 volts (measured on a Fluke) Reflected power 
(measured on a Bird 43) less than a half watt.

Is there any pot or control for fold back control? The schematic does 
not show one.

Also, what does the pot marked "stop" do?

73, Larry

K2LS