[Yaesu] FT-1000 Alignment Question - SHIFT Control Center

[Rich Hallman - N7TR]

I have not tested that but the monitor tx audio seems to sound the same between both sidebands..

-----Original Message-----
From: yaesu-bounces at contesting.com [mailto:yaesu-bounces at contesting.com] On Behalf Of GGLL
Sent: Sunday, August 17, 2008 2:46 PM
To: yaesu at contesting.com
Subject: Re: [Yaesu] FT-1000 Alignment Question - SHIFT Control Center

	Do you get similar reports on your transmission?.

Regards
Guillermo - LU8EYW.

Rich Hallman - N7TR escribió:
> I noticed on one of my FT-1000's that the audio tone difference between
> USB and LSB is quite noticeable.  To get the tone correct I need to turn
> the SHIFT control from center to almost 3 o'clock for one side...then 9
> o'clock for the other sideband.
> 
>  
> 
> I have the alignment manual, but wanted to know what alignment would
> potentially fix this issue.
> 
>  
> 
> Thanks...
> 
> Rich
> 
>  
> 
> Rich N7TR
> 
> ex KI3V, N3AMK, WB3JOV
> 
> www.n7tr.com
> 
> Telnet: dxc.n7tr.com N7TR DXCluster
> 
>  
> 
> _______________________________________________
> Yaesu mailing list
> Yaesu at contesting.com
> http://lists.contesting.com/mailman/listinfo/yaesu
> 
> 
_______________________________________________
Yaesu mailing list
Yaesu at contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu