[Yaesu] (no subject)

[Randy Friend]

How is the RF setting or the SQUELCH settings?  You might have SQUELCH set so high the SSB doesn't come through.... Similarly, you may have had the RF set down to a low level - that was good enough for FM - but not enough for weak signals on SSB and CW.
 
Randy

--- On Mon, 8/18/08, Jason <j_da_fox at yahoo.com> wrote:

From: Jason <j_da_fox at yahoo.com>
Subject: [Yaesu] (no subject)
To: yaesu at contesting.com
Date: Monday, August 18, 2008, 12:05 PM

Hi all. I have a Ft726R that is acting funny. It has 2m, 440, and the 10m module
in it. The radio works fine on FM, but will not transmit on ssb or cw on any
band. It also has little receive audio on ssb and cw. If you turn up the volume
all the way, you can faintly hear a signal. Any ideas? Thanks

Jason
KC0KWL


      
_______________________________________________
Yaesu mailing list
Yaesu at contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu