[Yaesu] G800 Rotor Box

[K1TTT]

That sounds like the bad drive motor problem at:
http://www.k1ttt.net/technote/yaesu.html



David Robbins K1TTT
e-mail: mailto:k1ttt at arrl.net
web: http://www.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
 

> -----Original Message-----
> From: Ralph Matheny [mailto:mathenyr at marietta.edu]
> Sent: Monday, March 16, 2009 15:22
> To: yaesu at contesting.com
> Subject: [Yaesu] G800 Rotor Box
> 
> Is there any sort of troubleshooting guide out there for the control box
> for the G800SDX controlbox?  I have one which is intermittent; sometimes
> the pointer follows the antenna and somtimes is doesn't.  Am thinking a
> dirty relay contact or switch, but thought I'd see if anybody has been
> down this road before I started on it.  Vibration of the box will
> sometimes cause the indicator to zip to the correct position.
> 
> 
> Ralph Matheny
> K8RYU
> 207 Gibbons Place
> Marietta Ohio  45750
> mathenyr at marietta.edu
> 
> 
> 
> 
> 
> 
> 
> _______________________________________________
> Yaesu mailing list
> Yaesu at contesting.com
> http://lists.contesting.com/mailman/listinfo/yaesu