[Yaesu] Yaesu Microphone and other items FS

[Ken Simpson, W8EK]

Yaesu Items For Sale:

Yaesu MH-34 b 4 b speaker microphone
This is the one that fits the Yaesu VX-8, VX-7, VX-6,
VX-5, VX-3, VX-2, VX-1, and that series of HTs. I
think it also fits the FT-50 and FT-60, and maybe
others. It has a single 4 conductor, 3.5 mm plug on
it. This one is just like new. $30

Yaesu Lithium battery for Yaesu VX-2 or VX-3 HTs
Spare Lithium Ion battery pack for Yaesu VX-2 or VX-3.
It fits the new VX-3, as well as the earlier VX-2.
1200 mahr capacity. It holds a charge fine, and is
basically new. $20

Belt Clip for Yaesu FT-207, with hardware. $8

Wrist Strap for Yaesu FT-209, and probably others $4


Yaesu MH-1 B 8 dynamic hand microphone

This is the Yaesu hand microphone that has the round
8 pin connector on it. It will go with virtually any
Yaesu rig that uses the round 8 pin connector. It has
up, down, and fst switches, and well as a tone switch,
in addition to the PTT switch.

This particular unit works fie. The front of it looks
very good. The back has some minor defects, but nothing
that effects operation. $30


High Impedance Microphones:

Heath hand microphone
This is the black colored hand mic that was used on
the HW and SB series transceivers from 25 or 30 years ago.
It is a Hi Z  mic.  This particular mic is in good condition.
It works great, and looks OK cosmetically.  It even includes
the mounting clip (which looks like it was never used).
This mic presently has stripped and tinned ends, but of
course a connector can easily be added.
I have paper work for a Heath GH-12 A hand microphone with
it, but am not certain that is what it is.  My memory says
the GH-12 A was dark green in color, and this one is a
black color. $30

Clegg hand microphone
This is a high impedance hand microphone that says
Clegg on the front.  It says Astatic 527 on the back,
and is the sort of squarish hand mic that Clegg used
on much of their equipment.  It has the 2 pin Amphenol
connector, like used by Clegg, Heath, Hallicrafters,
and many others in that era.
This particular mic has a very nice pattern on the scope.
$30


Other Microphones:

Lafayette EAM-15 dynamic hand microphone
2000 ohm impedance can be used any place a dynamic mic is
needed. Striped and tinned leads.
It works fine, and looks good also. $25

Generic Hand Microphone
This is a low impedance hand microphone, black in color.
Striped and tinned leads. $22

Regular hand microphone
Electret Condenser microphone
Generic Black mic, with gray PTT bar. Requires polarizing
voltage. $25


DTMF Touch Tone Microphones:

CES 655 L "Microdialer" DTMF Microphone
You can manual dial a number, or automatically have it
stored in the mic, and "speed dial" with this mic. 12
digit touch tone pad on the front, with the microphone
part above the pad. This one presently has a 4 pin plug
on it, but of course that can be changed. $35

CES 600 L, Universal DTMF microphone
This has a normal touch tone pad on the front, with
a low impedance microphone. This one has the 8 pin
modular plug (like a computer LAN) on it. This mic has
not been used, so it is in really great condition.
With paper work for $40.

Data Signal "Data-Coder 5" touch tone mic
This mic has a 12 digit touchtone pad on it, plus a
normal low impedance microphone. With 4 pin plug.
Like new. $38


Speaker Microphones:

Yaesu MH-34 b 4 b speaker microphone
This is the one that fits the Yaesu VX-8, VX-7, VX-6,
VX-5, VX-3, VX-2, VX-1, and that series of HTs. I
think it also fits the FT-50 and FT-60, and maybe
others. It has a single 4 conductor, 3.5 mm plug on
it. This one is just like new. $30

Kenwood SMC-24 speaker microphone
Fits Kenwood TR-2400 HT and maybe others. This one looks
fine and works fine. $18


Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK at FLHam.net or W8EK at arrl.net
Voice Phone  (352) 732-8400