[Yaesu] FT990

[Richard F DiDonna NN3W]

Cant help there.  Havent seen that issue.

My issue with the FT990 is that on CW my tone seems to be 200 Hz above the 
receive frequency.  I assume that this is a pot adjustment, but which one?

73 Rich NN3W

----- Original Message ----- 
From: "Ronald A. Stunden " <ve_7_yc at shaw.ca>
To: <Yaesu at contesting.com>
Sent: Thursday, November 19, 2009 7:19 PM
Subject: [Yaesu] FT990


>I have two FT990s that have the same problem. they both jump frequency
> about 50 -70cy's then after a few seconds jump bacl again, Anyone ever
> have this problem? Also  would like to get the default for the USB/LSB
> trim pots (On top under the flap) Thanks  Ron VE7YC
> _______________________________________________
> Yaesu mailing list
> Yaesu at contesting.com
> http://lists.contesting.com/mailman/listinfo/yaesu
>