[Yaesu] FT-1000 vs. FT-1000D

[Paul Playford]

I modified my sub receiver slightly:

I removed the chassis wire from pin 1 of J6007, installed a 'Y' pin 
extension to pin 3 of P6007 and paralled the CW-N and CW chassis wires.  An 
easily reversable change.

Now when I select cw the 2.0 KHz filter is always enabled.

I do want wide band-width on the sub-receiver so I can locate the station 
the DX is working while split.

de Paul, W8AEF

ZF2JI/ZF2TA  FO8DX/FO8PLA  8Q7AA  XZ0A  VU7RG  TX5C

----- Original Message ----- 
From: <k6rb at baymoon.com>
To: "Paul Playford" <paul at w8aef.com>
Cc: "John Ahlbom" <john.ahlbom at gmail.com>; <yaesu at contesting.com>
Sent: Wednesday, October 14, 2009 12:01 PM
Subject: Re: [Yaesu] FT-1000 vs. FT-1000D


> That is absolutely right. When I first got my 1000D, I thought the sub-RX
> was gone because I had the 500 Hz filter selected. You can get a 600 Hz
> filter for the sub-RX, but since I have two FT-1000s set up for SO2R, I
> rarely use the sub-RX.
>
> Rob K6RB
>