[Yaesu] Yaesu and other items FS

Ken Simpson, W8EK W8EK at flham.net
Tue Jan 5 05:36:36 PST 2010


Yaesu Items For Sale:

Yaesu FNB-82 LI Lithium battery for Yaesu VX-2 or VX-3 HTs
Spare Lithium Ion battery pack for Yaesu VX-2 or VX-3.
This is a real Yaesu battery, and not an aftermarket.
Yaesu charges about $40 for it.
It fits the new VX-3, as well as the earlier VX-2.
1000 mahr capacity. It holds a charge fine, and is
basically new. $20

Belt Clip for Yaesu FT-207, with hardware. $8

Wrist Strap for Yaesu FT-209, and probably others $4


Yaesu MH-1 B 8 dynamic hand microphone

This is the Yaesu hand microphone that has the round
8 pin connector on it. It will go with virtually any
Yaesu rig that uses the round 8 pin connector. It has
up, down, and fst switches, and well as a tone switch,
in addition to the PTT switch.

This particular unit works fine. The front of it looks
very good. The back has some minor defects, but nothing
that effects operation. $30


VoMax Speech Processor:

This unit was considered the absolute best speech processor
available in the 80's. The VoMax splits the audio signal into
discrete bands, processes each band, passes the separate
signals through bandpass filters to eliminate distortion,
and sums the signals in a phase-equalizing combiner. The
result is superb audio you can feed to your transmitter
that has low distortion and 10-12db power gain!

The VoMax added between your microphone and transmitter
gives you extra punch that is equivalent to adding a linear
amplifier. It is power by 12 V DC at about 100 ma.

This particular unit works fine, and looks very nice.
Paper work is included for $75.


High Impedance Microphone:

Heath hand microphone
This is the black colored hand mic that was used on
the HW and SB series transceivers from 25 or 30 years ago.
It is a Hi Z  mic.  This particular mic is in good condition.
It works great, and looks OK cosmetically.  It even includes
the mounting clip (which looks like it was never used).
This mic presently has stripped and tinned ends, but of
course a connector can easily be added.
I have paper work for a Heath GH-12 A hand microphone with
it, but am not certain that is what it is.  My memory says
the GH-12 A was dark green in color, and this one is a
black color. $30


Other Microphones:

Shure 104 C, Low Z hand Microphone
This is a very heavy duty Shure mic. It appears to be new,
with stripped and tinned ends that have never been on a
connector. It is in its original box, with the original
instruction manual. $30

Generic Hand Microphone
This is a low impedance hand microphone, black in color.
It is presently has an 8 pin round connector, wired for
Kenwood. $25
As above, with no connector. $22

Regular hand microphone
Electret Condenser microphone
Generic Black mic, with gray PTT bar. Requires polarizing
voltage. $25

Lafayette EAM-15 dynamic hand microphone
2000 ohm impedance can be used any place a dynamic mic is needed.
Stripped and tinned leads.
It works fine, and looks good also. $25


DTMF Touch Tone Microphones:

CES 655 L "Microdialer" DTMF Microphone
You can manual dial a number, or automatically have it
stored in the mic, and "speed dial" with this mic. 12
digit touch tone pad on the front, with the microphone
part above the pad. This one presently has a 4 pin plug
on it, but of course that can be changed. $35

CES 600 L, Universal DTMF microphone
This has a normal touch tone pad on the front, with
a low impedance microphone. This one has the 8 pin
modular plug (like a computer LAN) on it. This mic has
not been used, so it is in really great condition.
With paper work for $40.

Data Signal "Data-Coder 5" touch tone mic
This mic has a 12 digit touchtone pad on it, plus a
normal low impedance microphone. With 4 pin plug.
Like new. $38


Speaker Microphones:

Yaesu MH-34 b 4 b speaker microphone
This is the one that fits the Yaesu VX-8, VX-7, VX-6,
VX-5, VX-3, VX-2, VX-1, and that series of HTs. I
think it also fits the FT-50 and FT-60, and maybe
others. It has a single 4 conductor, 3.5 mm plug on
it. This one is just like new. $35

Azden SDX-316
This is the rounder style speaker mic that fits nicely in
the palm of your hand. Has 3.5 mm and 2.5 mm plugs for
Azden, Icom, some Yaesu, and others. $ 20

Kenwood SMC-24 speaker microphone
Fits Kenwood TR-2400 HT and maybe others. This one looks
fine and works fine. $18


Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK at FLHam.net or W8EK at arrl.net
Voice Phone  (352) 732-8400









More information about the Yaesu mailing list