[Yaesu] FT1000D

[Joe Subich, W4TV]

> Checked the voltage and nothing so guess internal fuse behind the
> jack is blown. Wonder I difficult to replace that fuse will be ?
> Anyone have experience replacing that fuse ?

FT-1000D is relatively easy to replace.  Fuse is in a holder and easy
to access ... not soldered in and buried as in some of the newer rigs.
Uses a standard "meter" or instrumentation fuse ...

73,

    ... Joe, W4TV


On 7/2/2011 7:56 PM, Dr Michael Hunter wrote:
> Noted when I tried to load up my Microkeyer with the microHAM USB
> Device Router that it was not recognised by the computer. There was
> no power to the microKEYER. The power comes from the FT1K +13.5v
> phono jack in the back. Checked the voltage and nothing so guess
> internal fuse behind the jack is blown. Wonder I difficult to replace
> that fuse will be ? Anyone have experience replacing that fuse ?
>
> Mike K5HDU
>
> drmikeh at comcast.net
 > _______________________________________________
> Yaesu mailing list Yaesu at contesting.com
> http://lists.contesting.com/mailman/listinfo/yaesu
>