[Yaesu] Fwd: RTTY issue

[Joe Subich, W4TV]

Turn up the TX Audio level on your sound card and the mic Gain on
the FT-1000MP to get the necessary transmit output.  Note: PKT is
LSB configure MMTTY for "Sound" in the TXPort on the MISC tab.

73,

    ... Joe, W4TV


On 2015-02-27 5:34 AM, mike stokes wrote:
> ---------- Forwarded message ----------
> From: "mike stokes" <mike9v at gmail.com>
> Date: Feb 26, 2015 7:34 PM
> Subject: RTTY issue
> To: "smc" <SMC at w9smc.com>
> Cc:
>
> Hi
> I am having the following problem and hoping someone has some ideas.
>
> I bought a SignalLink USB interface to use with my FT-1000MP Mrk V with
> plans for me and my son (KD9BVD) to make some RTTY contacts this weekend.
> I am using the cable connected to the packet port and the rig is in the
> packet mode.  I can copy stations and can transmit but there is no RF
> output.  I can listen on another radio and hear the transmitted signal, but
> the RF is so low that it doesn't move the watt meter or the Power Output
> meter on the rig,  RF output is fine on CW and SSB .
> Any ideas ?  possible menu setting ?
>
> Thanks in advance.
>