[Yaesu] Yaesu FT-857D CAT Cable

[Michael Clarson]

Keith: Not sure what is going on between the radio and antenna, but the
857D can do CAT via the microphone jack. Perhaps this helps:

http://www.k6xx.com/radio/ft857ser.pdf

--73, Mike, WV2ZOW

On Sat, Jul 15, 2017 at 3:07 PM, Keith Dutson <kdutson at sbcglobal.net> wrote:

> I have an FT-857D in the truck, with TuneMatic antenna controller for
> Little
> Tarheel HP.  It has a CAT cable connection.
>
>
>
> When I work the Texas QSO Party in mobile category, I have a driver, and
> operate from the passenger seat.  I use a laptop for logging, which also
> gets info from the FT-857D via CAT cable.  I brought up this issue to
> TuneMatic at Hamvention, and TuneMatic said it uses the CAT cable for power
> only.  This makes no sense to me because there is a regular black/white
> power cable to TuneMatic unit.  The CAT connection is from an external,
> small box that interfaces to the FT0857D.  In other words, it does not
> interface to an Icom or Kenwood radio.
>
>
>
> I have looked for a "Y" CAT cable, but no luck so far.  Any suggestions?
>
>
>
> Thanks.
>
>
>
> 73, Keith NM5G
>
> _______________________________________________
> Yaesu mailing list
> Yaesu at contesting.com
> http://lists.contesting.com/mailman/listinfo/yaesu
>