[Yaesu] FT5100 LOW POWER OUT BOTH UHF AND VHF

[Keith Dutson]

Can power be selected (hi, lo)?  I had a Yaesu that was putting out low
power even with setting on high power.  Reset fixed it.

73, Keith NM5G

-----Original Message-----
From: Yaesu [mailto:yaesu-bounces at contesting.com] On Behalf Of Ted Boerkamp
Sent: Thursday, November 16, 2017 3:16 PM
To: Yaesu reflector <yaesu at contesting.com>
Subject: [Yaesu] FT5100 LOW POWER OUT BOTH UHF AND VHF

Hello everyone.....hoping someone can shed light on a possible reason why my
radio puts out only

roughly 20watts in high power on both uhf and vhf???I am seeing only 3 watts
uhf low power and

5 watts vhf low power. Is there some common circuitry used by both sides to
create output levels

or do I have possible multiple issues??? Any help is appreciated.

73

 

Ted VE3SS

_______________________________________________
Yaesu mailing list
Yaesu at contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu