[Yaesu] FT1000MP original and FT8 setup

[Dale Frederick]

Ted, I'm not sure about the MP version of the 1000. Most of us non-MP 
version ops are feeding the transmit signal into the MIC jack and using 
USB mode.

Someone did post http://www.tigertronics.com/ft1000mp.htm to the FT-1000 
Yahoo group, you might look at that.

Dale KB5IY


On 9/9/2018 9:18 AM, Ted Boerkamp wrote:
> Hello...can anyone help me with the cabling requirements to get my FT1000MP
> to transmit
>
> In FT8 mode?? I am also wondering if it might be similar to the PSK31
> cabling using the Packet jack
>
> on the back?? I have a cable connected to transmit PSK31 already and it
> works.
>
> Do I need to set up another USER set of parameters for proper transmission
> on USB??
>
>   I currently can receive FT8 no problem using WSJT but when I try to connect
> to someone
>
> the PTT is activated but no power out.
>
> Any help or instructions would be appreciated. I have looked all over the
> net for such info but not
>
> finding very much specific to the FT1000MP original.
>
> Thanks
>
>   
>
> Ted VE3SS
>
> _______________________________________________
> Yaesu mailing list
> Yaesu at contesting.com
> http://lists.contesting.com/mailman/listinfo/yaesu