Amps
[Top] [All Lists]

[AMPS] Silver plating

To: <amps@contesting.com>
Subject: [AMPS] Silver plating
From: measures@vc.net (Rich Measures)
Date: Wed, 3 Sep 97 08:38:01 -0800
>Hi all, can anyone explain to me why silver plating is used to 
>decrease loses in tank circuits and so on.  

Above 100MHz, silver plating is probably worthwhile.  A lower 
frequencies, polished copper with a coating of polyurethane varnish seems 
to do okay.  

>Looking at the figures 
>there seems to be a very small difference in resistivity and skin 
>depth between silver and copper.  Is is to reduce losses due to 
>tarnishing perhaps?
>
>Thanks, Fraser G4BJM
>
Silver oxide as well as silver sulphide (tarnish) are good conductors.  
Copper oxide is not.  
Rich---

R. L. Measures, 805-386-3734, AG6K   


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>