Amps
[Top] [All Lists]

[AMPS] Dentron MLA2500B

To: <amps@contesting.com>
Subject: [AMPS] Dentron MLA2500B
From: measures@vc.net (Rich Measures)
Date: Wed, 3 Dec 97 11:21:10 -0800
>
>On Tue, 2 Dec 1997 22:21:16 -0500 (EST) W2GR@aol.com writes:
>>Hi guys, i've got some amp questions and this seems to be the right 
>>place to
>>ask them....Name here is Mike and I've got a line on a Dentron 
>>MLA2500B for
>>abt 500 bucks.
>
>A great amp if the tubes are good; make absolutely sure of that first
>since new ones are around $500 each.
It might be a good idea to test the tubes with a high-pot at 5kV.  If the 
leakage is over 10ua with plus on the anode, reverse the polarity.  If 
the leakage decreases, the tube has microscopic loose gold melt-balls 
inside the envelope.  This condition is not necessarily fatal.   
>
> This will be my first amp and was wondering how this 
>>amp
>>stacks up.
>>   It uses a pair of 8875's ..are they still available and how much 
>>power can
>>I expect out? Also$$$$$
>
>The amp will do 1800W but for tube longevity keep it in the 1200-1300W
>range. 
The max. keydown rating is 700mA for the 8875s.  
>Make sure that the grid swamping resistor, R-1, is in the circuit.
R-1 is a wirewound resistor.  
>Many MLA owners cut it out to get even more power!
Rogers on that, good buddy.  
>>   I will be driving it with my 1000MP, will the TR be fast enough?
No
... ...
>>   Does it have any protective circuits?
It needs 20 ohms at 20w in series with the B+.  If you discover that the 
vhf suppressor resistors measure more ohms than 150 ohms ea., it might be 
a good idea to improve the suppressors.  
>NO and the low speed fan is too slow. Add resistance in parallel on the
>terminal strip to speed it up a bit. 
>
>>   Can it be used for the WARC bands?
>
>Many will smoke the plate choke on 12M. There appears to be a winding
>difference or tolerance between some MLA's.  Try running it at 600W or so
>on 12M then feel the lower end of the choke...AFTER discharging the caps,
>pulling the plug, etc!!  If you feel a hot spot, remove 5 turns and try
>again. The trick is to place the choke resonance up in the CB band. 
amen, or get a dipmeter and park the choke resonance on Channel 6 before 
you give it the smoke test. 
 Rich..

R. L. Measures, 805-386-3734, AG6K   


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>