>I want to build a 300 ohm, 2kw, non-inductive resistor to use as a dummy
>load or antenna terminating resistor at about 4 mhz.
>
>Any ideas where I might be able to purchase a completed unit or 6, 50 ohm,
>300 watt resistors.
Bird, Dale for resistors
If it's for outdoors, one could build a 300ohm 4-wire transmission line
out of #14 nichrome wire, & put a smaller 300 ohm R at the end.
cheers, Len
Rich...
R. L. Measures, 805-386-3734, AG6K
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|