Amps
[Top] [All Lists]

[AMPS] Sealing of RF chamber

To: <amps@contesting.com>
Subject: [AMPS] Sealing of RF chamber
From: jono@webspun.com (Jon Ogden)
Date: Fri, 22 May 98 21:01:19 -0500
Hi all,

I am in the process of putting my 4-1000 amp back together.  YES!

Anyhow, the original builder used silicone between the part of the 
chassis underneath the blower and the bottom panel.  I'll call the area 
underneath the blower the RF chamber since that is where the tube and 
most of the RF circuitry is.  Anyhow, he used the silicone to attempt to 
make an air tight a chamber as possible.  The problem is it made a mess 
if you had to take the bottom cover off.

So is sealing off the RF chamber really necessary?  I have replaced the 
original blower with a 3300 RPM blower with a 3.5" squirrel cage.  It 
really moves a LOT of air.

Should I seal it up, or just rely on the mechanical pressure I get from 
the screws that hold on the bottom cover?

73,

Jon
KE9NA


-------------------------------------
Jon Ogden
KE9NA

http://www.qsl.net/ke9na


"A life lived in fear is a life half lived."


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>