Amps
[Top] [All Lists]

[AMPS] Re: SB-1000 WARC usage

To: <amps@contesting.com>
Subject: [AMPS] Re: SB-1000 WARC usage
From: jmellis@ihug.co.nz (Martin Ellis)
Date: Fri, 29 May 1998 08:39:15 +1200
Vic wrote:
> I have the following problem with my SB-1000: Although the
> plate circuit tunes 18 mhz in the 21 mhz position and 24 mhz
> in the 28 mhz position, it's not possible to adjust
> the input tuned circuit so that the input swr on both 18 and 21
> or 24 and 28 mhz will be acceptable to my exciter.

Hello Vic,
Not sure of the serial # of your SB1000.  I purchased a kit
in 1989 from Portland Radio, and soon after assembly, I was 
advised that Heathkit had released a new plate circuit RFC.
I was sent this FOC and the amp has operated safely on 17M
(no ant on 12M).  The new RFC has a narrow diameter section
at the plate end.  So if yours has a single diameter,
you may wish to try a replacement from Ameritron.

I simply moved the 15M input slug to be a compromise
between 21MHz and 18MHZ.  
Hope this may help.

Martin ZL1ANJ

--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>