Amps
[Top] [All Lists]

[AMPS] 432 Mhz Amp Plus new tube

To: <amps@contesting.com>
Subject: [AMPS] 432 Mhz Amp Plus new tube
From: km1h@juno.com (km1h@juno.com)
Date: Mon, 21 Dec 1998 09:54:15 -0500


On Mon, 21 Dec 1998 02:29:51 -0800 (PST) igor rosky <irosky@yahoo.com>
writes:
>
>
>What is the easiest 432 mhz amp design to build, and what tube should
>i use if i am purchasing a new tube.
>All i have is couple of 4xc350fs which i am not sure if the are rated
>for 432megs
>
>
>Igor

IF you have access to one it may be far simpler to purchase the
AM-6154/6155  FAA amp. They are available in the $150-300 dollar range
depending if they are already converted to 432.
The amp uses the 8930 tetrode and will run 300-400W out with 10W drive.
The Svetlana 4CX400A is virtually a plug-in replacement.

For new construction and low drive I would suggest the 4CX400A.  The
4CX250B and 250R series will also work quite well.
The 350F is only rated to 110mHZ for full ratings.

There are several choices in triodes and other tetrodes but cost and
availability may be an issue.

73  Carl  KM1H


___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]

--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>