Will,
Put some 100w light bulbs in series with the load and run it for a couple
of hours like that and then up the wattage to 200 and run it for a couple
of more hours and up the wattage again etc,etc,etc, Use one in line for
110v and 2 for 220v and disconnect the HV to the RF deck first.
Larry K0AEY
----------
> From: Will K6NDV <k6ndv@contesting.com>
> To: amps@contesting.com
> Subject: [AMPS] L4B power supply
To: <amps@contesting.com>
> Date: Tuesday, January 26, 1999 6:31 AM
>
>
> I have a L4B power supply what is basically new and has not been used for
> many, many years.
> I have not turned it on yet and I would like to ask the group how to
tackle
> this one.
> Thanks Will, K6NDV
>
>
>
>
> --
> FAQ on WWW: http://www.contesting.com/ampfaq.html
> Submissions: amps@contesting.com
> Administrative requests: amps-REQUEST@contesting.com
> Problems: owner-amps@contesting.com
> Search: http://www.contesting.com/km9p/search.htm
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|