>
>Hi Bill...
>
>I agree with both Vic and Carl, but to add a few tidbits: 1) I prefer
>Carl's approach of checking the frequency with a receiver, as that
>eliminates one variable (the coupling loop to the freq counter moving
>around and possibly pulling dip meter freq.); 2) Use a wide strap or braid
>to short the ends of the choke so as not to affect it's actual series
>resonant frequencies more than necessary; .......
? How is placing a wide shorting strap adjacent to the winding not going
to affect anything? Why not dip the choke when it is wired in place, 'au
naturel'? When my Kenwood dipper's pickup coil is adjacent to an
installed hv-rfc, it has no problem spotting resonances.
>:.......
Rich...
R. L. Measures, 805-386-3734, AG6K, www.vcnet.com/measures
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|