On Mon, 15 Mar 1999 14:16:06 -0800 Rich Measures <measures@vc.net>
writes:
>
>
>
>>
>>Did I miss something? How can you inductively couple a dipper to any
>>inductor's series resonance without shorting the subject L
>end-to-end? Any
>>dips you get with the RFC just sitting there, ........
>
>? The hv rfc is not just sitting there, Dick. . Wired in, the
>bottom
>end of the hv rfc connects to RF ground through the B+ bypass
>capacitors.
> The upper end of the rfc connects to the tune-C, which typically has
>a
>moderately low reactance to ground. In practice, the not
>strap-shorted
>method works.
Not at all. The chap who suggested disconnecting the output tank was much
more on track.
Your method is a pure hit or miss approach.
73 Carl KM1H
>>...........
>- end -
>
>
>Rich...
>
>R. L. Measures, 805-386-3734, AG6K, www.vcnet.com/measures
>
>
>--
>FAQ on WWW: http://www.contesting.com/ampfaq.html
>Submissions: amps@contesting.com
>Administrative requests: amps-REQUEST@contesting.com
>Problems: owner-amps@contesting.com
>Search: http://www.contesting.com/km9p/search.htm
>
>
___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|