Amps
[Top] [All Lists]

[AMPS] Arcing in air vs. arcing in a vacuum

To: <amps@contesting.com>
Subject: [AMPS] Arcing in air vs. arcing in a vacuum
From: measures@vc.net (Rich Measures)
Date: Mon, 17 May 1999 10:15:02 -0700


>
><snip>
>So he has made the conclusion that if the breakdown potential of thin
>air is less than regular air, the breakdown potential of a vacuum is
>less still. I don't know if this jump can be made.
>
>Hi Jon -
>
>If my limited memory is working you are correct in doubting if you can
>make that "jump".  Sorta sounds like the old non-sequitur: If a little
>oil is good for your engine, then a lot of oil must be better.  :o)
>
>The worst problems with corona/arc etc., occur at very high altitudes
>(~100K feet) and gets better below and above.  In high pressure (thick)
>air, and in zero-pressure (no molecules -  vacuum) the problem
>diminishes.
>
?  well put, Mike


Rich...

R. L. Measures, 805-386-3734, AG6K, www.vcnet.com/measures  


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>