Amps
[Top] [All Lists]

[AMPS] Purpose of components on SB-1000

To: <amps@contesting.com>
Subject: [AMPS] Purpose of components on SB-1000
From: zeitler@ibm.net (zeitler@ibm.net)
Date: Wed, 9 Jun 1999 22:18:15 -0700
Gents,
The Heathkit SB-1000 amp has a very small (tiny) coil in series with the B-
and also has a 1N5408 in parallel with the B- right after the tiny coil with
the anode side to ground. Component designations are L401 and D401 on the HV
PS board. What are they for?

Note: These are tapped off right at the bottom of the last cap used in the E
doubler.

Lane Zeitler
Ku7i
San Diego


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>