Amps
[Top] [All Lists]

R: [AMPS] RF Choke Forms

To: <amps@contesting.com>
Subject: R: [AMPS] RF Choke Forms
From: measures@vcnet.com (measures)
Date: Sat, 15 Jan 2000 09:22:46 -0700
>Teflon is electrically very good and relatively easy to work. Although 
>expensive, it's a convenient and professional replacement for ceramic and 
>glass in RF applications involving consistent power (much more than in 
>amateur applications) and very high frequencies. Teflon losses, even when 
>used inside a coil, stay minimal and the material itself withstands high 
>temperatures too.
>Do not use plastic and symilar materials were the losses increase with 
>frequency (i.e. nylon) and be aware of risks when using materials which 
>might burn in their composite structure if something arcs, therefore 
>losing their original insulating property. (i.e. fiberglass)
>
When Teflon burns it sublimates into phosgene gas.  (CoCl2)

cheers, Mauri

-  Rich..., 805.386.3734, www.vcnet.com/measures.  


--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>