Amps
[Top] [All Lists]

[AMPS] RF Choke Forms

To: <amps@contesting.com>
Subject: [AMPS] RF Choke Forms
From: gjerning@flash.net (Arne Gjerning)
Date: Fri, 14 Jan 2000 23:13:59 -0700

--------------980BEBE6031EC6826C1EB3BC
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

I have been advised NOT to use Teflon, Delryn, and a few other
insulating materials for an RF choke. Instead only use ceramic. It was
then stated the "D" factor was the reason.

OK, but why as I could not find info on this subject in the ARRL
Handbook. Any help to point me in the direction of knowledge on this
subject would be appreciated.  May as well learn something while
building my amp. And I want to do it RIGHT.

73 de Arne N7KA

--------------980BEBE6031EC6826C1EB3BC
Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: 7bit

<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
<font face="Arial,Helvetica"><font size=-1>I have been advised NOT to use
Teflon, Delryn, and a few other insulating materials for an RF choke. Instead
only use ceramic. It was then stated the "D" factor was the 
reason.</font></font><font face="Arial,Helvetica"><font size=-1></font></font>
<p><font face="Arial,Helvetica"><font size=-1>OK, but why as I could not
find info on this subject in the ARRL Handbook. Any help to point me in
the direction of knowledge on this subject would be appreciated.&nbsp;
May as well learn something while building my amp. And I want to do it
RIGHT.</font></font><font face="Arial,Helvetica"><font size=-1></font></font>
<p><font face="Arial,Helvetica"><font size=-1>73 de Arne 
N7KA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</font></font></html>

--------------980BEBE6031EC6826C1EB3BC--


--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>