Amps
[Top] [All Lists]

[AMPS] RF Choke Forms

To: <amps@contesting.com>
Subject: [AMPS] RF Choke Forms
From: kc4slk@csrlink.net (Mike Sawyer)
Date: Sat, 15 Jan 2000 08:11:45 -0500
This is a multi-part message in MIME format.

------=_NextPart_000_0018_01BF5F30.29E055A0
Content-Type: text/plain;
        charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

Arne,
    I know of several people that have used TEFLON for filament chokes =
and have not suffered any problems from them. Here is a simple test: =
Take whatever material you think may be suitable and place it in a =
microwave oven, (with a bowl of water), for about 1 minute. Pull it out =
(be careful! It may be hot!!). If it is warm or hot to the touch, or if =
it was rigid before going into the oven and it is now soft and pliable, =
chances are it will not be very good material to use.=20
    Just keep in mind that there are exceptions to the rule but this =
will at least give you some degree of confidence.
Good luck,
Mike(y)
W3SLK
  ----- Original Message -----=20
  From: Arne Gjerning=20
  To: Amp Ref=20
  Sent: Saturday, January 15, 2000 1:13 AM
  Subject: [AMPS] RF Choke Forms


  I have been advised NOT to use Teflon, Delryn, and a few other =
insulating materials for an RF choke. Instead only use ceramic. It was =
then stated the "D" factor was the reason.=20
  OK, but why as I could not find info on this subject in the ARRL =
Handbook. Any help to point me in the direction of knowledge on this =
subject would be appreciated.  May as well learn something while =
building my amp. And I want to do it RIGHT.=20

  73 de Arne N7KA      =20


------=_NextPart_000_0018_01BF5F30.29E055A0
Content-Type: text/html;
        charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content=3D"text/html; charset=3Diso-8859-1" =
http-equiv=3DContent-Type>
<META content=3D"MSHTML 5.00.2314.1000" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT size=3D3>Arne,</FONT></DIV>
<DIV>&nbsp;&nbsp;&nbsp; I know of several people that have=20
<STRONG><EM>used</EM></STRONG> TEFLON for filament chokes and have not =
suffered=20
any problems from them. Here is a simple test: Take whatever material =
you think=20
may be suitable and place it in a microwave oven, (with a bowl of =
water),=20
for&nbsp;about 1 minute. Pull it out (be careful! It may be hot!!). If =
it is=20
warm or hot to the touch, or if it was rigid before going into the oven =
and it=20
is now soft and pliable, chances are it will not be very good material =
to use.=20
</DIV>
<DIV>&nbsp;&nbsp;&nbsp; Just keep in mind that there are exceptions to =
the rule=20
but this will at least give you some degree of confidence.</DIV>
<DIV>Good luck,</DIV>
<DIV>Mike(y)<BR>W3SLK</DIV>
<BLOCKQUOTE=20
style=3D"BORDER-LEFT: #000000 2px solid; MARGIN-LEFT: 5px; MARGIN-RIGHT: =
0px; PADDING-LEFT: 5px; PADDING-RIGHT: 0px">
  <DIV style=3D"FONT: 10pt arial">----- Original Message ----- </DIV>
  <DIV=20
  style=3D"BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"><B>From:</B>=20
  <A href=3D"mailto:gjerning@flash.net"; title=3Dgjerning@flash.net>Arne =
Gjerning</A>=20
  </DIV>
  <DIV style=3D"FONT: 10pt arial"><B>To:</B> <A =
href=3D"mailto:amps@contesting.com"=20
  title=3Damps@contesting.com>Amp Ref</A> </DIV>
  <DIV style=3D"FONT: 10pt arial"><B>Sent:</B> Saturday, January 15, =
2000 1:13=20
  AM</DIV>
  <DIV style=3D"FONT: 10pt arial"><B>Subject:</B> [AMPS] RF Choke =
Forms</DIV>
  <DIV><BR></DIV><FONT face=3DArial,Helvetica><FONT size=3D-1>I have =
been advised=20
  NOT to use Teflon, Delryn, and a few other insulating materials for an =
RF=20
  choke. Instead only use ceramic. It was then stated the "D" factor was =
the=20
  reason.</FONT></FONT><FONT face=3DArial,Helvetica><FONT =
size=3D-1></FONT></FONT>=20
  <P><FONT face=3DArial,Helvetica><FONT size=3D-1>OK, but why as I could =
not find=20
  info on this subject in the ARRL Handbook. Any help to point me in the =

  direction of knowledge on this subject would be appreciated.&nbsp; May =
as well=20
  learn something while building my amp. And I want to do it=20
  RIGHT.</FONT></FONT><FONT face=3DArial,Helvetica><FONT =
size=3D-1></FONT></FONT>=20
  <P><FONT face=3DArial,Helvetica><FONT size=3D-1>73 de Arne=20
  N7KA&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</FONT></FONT>=20
</P></BLOCKQUOTE></BODY></HTML>

------=_NextPart_000_0018_01BF5F30.29E055A0--


--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>