Amps
[Top] [All Lists]

[AMPS] RF Choke Forms

To: <amps@contesting.com>
Subject: [AMPS] RF Choke Forms
From: philk5pc@tyler.net (Phil Clements)
Date: Sat, 15 Jan 2000 11:29:23 -0600
I have seen and used Teflon in many high power HF amps.
It has good D factor numbers, and is easy to groove and tap.
Henry uses Teflon in all their high power industrial RF generators
that run continuously, 8 hrs per day; and most of their ham amps.
Creative Electronics also uses it.

G-10 fiberglass is almost as good, but will usually not survive a
choke fire. (melts)

(((73)))
Phil, K5PC







>I have been advised NOT to use Teflon, Delryn, and a few other insulating
materials for an RF choke. Instead >only use ceramic. It was then stated the "D"
factor was the reason.
>OK, but why as I could not find info on this subject in the ARRL Handbook. Any
help to point me in the >direction of knowledge on this subject would be
appreciated.  May as well learn something while building my >amp. And I want to 
do
it RIGHT.
>73 de Arne N7KA



--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>