Amps
[Top] [All Lists]

[AMPS] Diodes

To: <amps@contesting.com>
Subject: [AMPS] Diodes
From: 2@vc.net (measures)
Date: Mon, 21 Feb 2000 09:51:35 -0700
>
>While searching for a part for work, I worked through the rectifiers section
>of the Farnell (Premier) catalogue. Philips, in particular seem to have
>quite a range of 4-8A diodes with 1kV+ rating, at $1-2 prices.
>
>One that really caught my eye was the IR 10ETS16 - 10A average forward
>current, 1600V PIV, price about $3. Not the cheapest, but 4 or 5 per leg
>should handle anything a normal mortal can throw at it. Also interesting is
>the 20ETS16, which is the same but 20A rating for about 10% more money.

Add the cost and inconvience of heat sinks.  I built a FWD, 9100v no-load 
8171 supply with 3A diodes.  It is still working, 19-years later.  
>
>One side benefit - it's branded product so you can look at the specs and
>decide on voltage sharing strategy with confidence.
>
There is bound to be some piv variation.  To find out what's what, one 
needs a high-pot. // Without any "voltage sharing strategy", there is 
Always equal reverse current in each diode.  Some things are best left 
alone.  

cheers, Steve

--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>