Amps
[Top] [All Lists]

[AMPS] 6 volts on a 3-500Z filament

To: <amps@contesting.com>
Subject: [AMPS] 6 volts on a 3-500Z filament
From: W8JI@contesting.com (Tom Rauch)
Date: Tue, 7 Mar 2000 09:08:19 -0500
> Same thing happened to me Bill. Only the filament wire going to the choke
> was about 18 gauge wire. This caused about a 1.5 VAC drop from the
> filament xformer to the choke for the 3-400Z's. I was only able to get
> about 600 watts out when I was supposed to get 1KW.

I've actually seen people ruin tubes (8877's) by reducing filament 
voltage!  A metal oxide cathode tube can be ruined if you operate it 
very much below rated voltage, so remember lower voltage does 
not always mean longer life.


 
73, Tom W8JI
w8ji@contesting.com

--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>