Amps
[Top] [All Lists]

[AMPS] RF Deck Components

To: <amps@contesting.com>
Subject: [AMPS] RF Deck Components
From: w2cqm@juno.com (w2cqm@juno.com)
Date: Sun, 7 May 2000 13:46:21 -0400
SELL:* 2 pole 11 position high quality porcelain band switch rated at
5-6KW. Front panel mounting standoffs with rear support bracket. 
*High voltage plate choke wound on 1" solid porcelain rod w/ 5" of
closewound #20 enameled wire. Overall length 6" with both ends tapped for
horizontal/vertical mounting
*Two coils to accommodate 10-160m. 10-40m coil is 6 turns of 1/4"
silvered tubing 2-1/2" wide and 3" long. 80-160m coil is a B&W 3"x5"  #10
with a plastic  sheet fitted to the inside to assist mounting. 
*three (3) zener diodes 12VDC@10W.  $105 shipped for the package 

Heavy wall teflon chimney for the Eimac 8877  $30 shipped

6.0VAC@25 amp+  filament transformer with dual 110 primaries.
Specifically wound for the Eimac 3CX1200D7 but will accommodate the
4CX1000/1500 and replace the filament xmfr in the Collins 30S1.  $75+
shipping

http://homestead.juno.com/w2cqm/files/RFDeckcomponents4.jpg

Ron W2CQM New York City 
  

--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>
  • [AMPS] RF Deck Components, w2cqm@juno.com <=