Amps
[Top] [All Lists]

[AMPS] Relays hanging up

To: <amps@contesting.com>
Subject: [AMPS] Relays hanging up
From: Eric Dobrowansky" <kk2ed@adelphia.net (Eric Dobrowansky)
Date: Sat, 12 Aug 2000 11:55:46 -0400

Per a service bulletin, this was Kenwood's solution to a well-known relay
problem in the TS430S transceiver.

----- Original Message -----
From: Maurizio Panicara <i4jmy@iol.it>
To: <W8JI@contesting.com>; <amps@contesting.com>
Sent: Saturday, August 12, 2000 7:01 AM
Subject: R: [AMPS] Relays hanging up


> Altought looking strange, which is missing here is the lack of a
> micro-arcing between contacts that serves to remove oxidization.
> Once I saw a tricky method where a limited DC current was set to flow
into
> a receiver relay contacts to overcome the oxidization problem.
>
> 73,
> Mauri I4JMY
>



--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>