>
>
>-----Original Message-----
>From: Tom Rauch <w8ji@contesting.com>
>To: Steve Thompson <rfamps@ic24.net>
>Cc: amps@contesting.com <amps@contesting.com>
To: <amps@contesting.com>
>Date: 10 September 2000 01:05
>Subject: Re: [AMPS] Blown TL922A... What to do?
>
>
>>
>>> I'm not sure that it's worth transatlantic shipping charges to sent a cap
>>> to me. One of those I have in the box comes out of an old MLA 2500 - I
>>> guess that's probably reasonably representative. The one I was looking at
>>> last week was maybe a bit low in value.
>>
>>I thought you were stateside for some reason. The MLA2500 is
>>from the same capacitor manufacturer, but has less C if I'm not
>>mistaken.
>
>
>I'm firmly in old Blighty. I mentioned doing US licence exams, but that's a
>means of getting round archaic UK licence regs.
>
>>
>>The best thing to do is measure the actual stock layout of an
>>amplifier accused of switch failures from parasitics.
>
>
>If I can get access to one, I'll do it.
>
The MLA-2500 is apparently not a bandswitch destroyer. The TL-922 is.
The 6000v Tune-C makes the 5000v bandswitch more vulnerable.
later, Steve
>
>
>
>--
>FAQ on WWW: http://www.contesting.com/FAQ/amps
>Submissions: amps@contesting.com
>Administrative requests: amps-REQUEST@contesting.com
>Problems: owner-amps@contesting.com
>
>
- Rich..., 805.386.3734, www.vcnet.com/measures.
end
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|