Amps
[Top] [All Lists]

[AMPS] All Mode KW Transmitter firmware

To: <amps@contesting.com>
Subject: [AMPS] All Mode KW Transmitter firmware
From: kc4slk@csrlink.net (Mike Sawyer)
Date: Fri, 15 Sep 2000 20:30:44 -0400
I have a transmitter like that Marv. It an old RCA ET-4337/F. A pair of
813's modulated by 805's. Conservative output on AM is about 250 watts. All
the wiring is bus wire. I like it because I don't need a microscope nor
$10,000 worth of bench equipment to repair it!
8+)
Mike(y)
W3SLK

PS: AM stands for "Angel Music!"

----- Original Message -----
From: Radio WC6W <wc6w@juno.com>
To: <warrenw@pentek.com>; <amps@contesting.com>
Sent: Friday, September 15, 2000 12:26 PM
Subject: Re: [AMPS] All Mode KW Transmitter firmware


>
> On Fri, 15 Sep 2000 12:05:01 -0400 "Warren J. Walsh" <warrenw@pentek.com>
> writes:
> >At 11:55 AM 9/15/00 -0400, Radio WC6W wrote:
> >
> >
> >Gee Marv, you mean you don't have a surface mount reflow solder station?
>  I
> >think every ham should have one of those in his tool kit! :-)))
> >
> >Before becoming a designer, I worked the bench as a technician and I'm
> >pretty good at fine pitch SMT soldering.  I now give most of my
> soldering
> >work to our production people, but I still have access and do my own
> >soldering from time to time.  So if you really need some help, send me
> your
> >boards and parts and I'll solder them on for you!
> >
> >73,
> >Warren - K2BM
> >
>
> Hi Warren,
>   Yes, I do have one of those fancy soldering setups... but, I don't like
> the way things are trending in the IC package department.
>
>   25 mils pitch wasn't too bad but, the DSP chip I'm looking at using has
> pins on 20 mil ctrs.;  And the Up-Converter chip is 19 mils -- Whoooo is
> making up these numbers!!
>
>    I just get a mite frustrated when every new part comes in a new
> (smaller!) package -- meaning a new PCB footprint to make up and
> sometimes another set of tips for the soldering station (at $$$ per!).
>
>   Makes me want to built something (to compensate) where the filament
> leads are fastened to the socket with ¼-20 bolts!  :-)
>
> 73,
>   Marv  WC6W
>
>
>
>
>
>
> *
>
> ________________________________________________________________
> YOU'RE PAYING TOO MUCH FOR THE INTERNET!
> Juno now offers FREE Internet Access!
> Try it today - there's no risk!  For your FREE software, visit:
> http://dl.www.juno.com/get/tagj.
>
> --
> FAQ on WWW:               http://www.contesting.com/FAQ/amps
> Submissions:              amps@contesting.com
> Administrative requests:  amps-REQUEST@contesting.com
> Problems:                 owner-amps@contesting.com
>


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>